543623
66
Zoom out
Zoom in
Previous page
1/95
Next page
PROJECTOR SETUP menu
66
- ENGLISH
Settings
REMOTE MODE
You can customize the [REMOTE IN] terminal
function.
Press ▲▼ to select [REMOTE MODE].1 )
Press ◄► to switch [REMOTE MODE].2 )
The setting will change as follows each time
z
◄► is pressed.
DEFAULT USER F SERIES
DEFAULT
The pin assignment of the [REMOTE
IN] terminal is used as the projector
default setting. (
Æ
page 85)
USER
This is used for changing the settings
for the REMOTE terminal.
Any settings you make for pins 2
to 8 become valid once you press
<ENTER> button.
F SERIES
Use the setting for F Series-compatible
REMOTE terminal.
FUNCTION BUTTON
Three function buttons (<FUNCTION1 to 3>) on the
remote control and the <FUNCTION1> button on the
projector can be assigned to any frequent operations.
They can be used as a useful shortcut button.
buttons
Press any of the <FUNCTION1 to 3> 1 )
buttons on the remote control or the
<FUNCTION1> button on the projector.
Press <MENU> button on the remote 2 )
control or the projector to select a
menu option (Main Menu, Submenu or
Advanced Menu).
For the on-screen menu selection, see
z
“On-
screen menu". (
Æ
page 39)
Hold down any of the <FUNCTION1 3 )
to 3> buttons on the remote control
or the <FUNCTION1> button on the
projector more than 3 seconds.
Note
For details, see
z
“FUNCTION BUTTON” section of
“PROJECTOR SETUP”. (
Æ
page 66)
AUDIO SETTING
VOLUME
J
You can adjust the volume of the built-in monaural
speaker and VARIABLE AUDIO OUT terminal.
◄ Decrease
z
► Increase
z
BALANCE
J
You can adjust to hear the sound played equally
through both right and left from VARIABLE AUDIO
OUT, or shift the balance so more sound plays
through the left or right side.
◄ More sound plays through the left side
z
► More sound plays through the right side
z
IN STANDBY MODE
J
You can switch on/off the sound output in standby
mode.
OFF No sound in standby mode.
z
ON Output audio in standby mode.
z
J
AUDIO IN SELECT
A sound input terminal of [AUDIO IN 1], [AUDIO IN
2], [AUDIO IN 3], [HDMI AUDIO IN] and [NETWORK
AUDIO IN] can be selected.
Press ▲▼ to select a [AUDIO IN 1 )
SELECT] terminal.
Press ◄► to switch [AUDIO IN 2 )
SELECT].
The setting will change as follows each time the
z
button is pressed.
AUDIO IN 1 AUDIO IN 2 AUDIO IN 3
NETWORK
AUDIO IN
*2
HDMI AUDIO
IN
*1
An input terminal having the HDMI port only*1 :
An input terminal having the network port only*2 :
AUDIO IN 1
Sound is output from AUDIO IN 1
terminal when video of preset input
terminal is projected.
AUDIO IN 2
Sound is output from AUDIO IN 2
terminal when video of preset input
terminal is projected.
AUDIO IN 3
Sound is output from AUDIO IN 3
terminal when video of preset input
terminal is projected.
HDMI
AUDIO IN
Sound is output from HDMI terminal
when video of preset input terminal is
projected.
NETWORK
AUDIO IN
Sound is output from NETWORK
terminal when video of preset input
terminal is projected.
66


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Panasonic PT-DZ570U at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Panasonic PT-DZ570U in the language / languages: English as an attachment in your email.

The manual is 10,9 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Panasonic PT-DZ570U

Panasonic PT-DZ570U Installation Guide - English - 42 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info