543623
14
Zoom out
Zoom in
Previous page
1/42
Next page
14
NETWORK menu (continued)
AUTHENTICATION
Set the user authentication method used by the network to be connected.
OPEN
Select when making a connection using [AD HOC], or when the access point
authentication method is OpenSystem
_1
.
SHARED
Select when making a connection using [AD HOC], or when the access point
authentication method is Shared Key
_1
.
WPA-PSK
_2
Select when the access point authentication method is WPA-PSK
_1
.
WPA2-PSK
_2
Select when the access point authentication method is WPA2-PSK
_1
.
ENCRYPTION
Select the encryption method to be used for communication between the
projector and the network.
NONE
Select when transmit without encryption. It is selectable only when
[AUTHENTICATION] is [OPEN] or [SHARED].
WEP
_1
Select when ENCRYPTION is WEP.
TKIP
_1
Select when ENCRYPTION is TKIP.
Selectable when [AUTHENTICATION] is either [WPA-PSK] or [WPA2-PSK].
AES
_1
Select when ENCRYPTION is AES.
Selectable when [AUTHENTICATION] is either [WPA-PSK] or [WPA2-PSK].
1: “Glossary” ( _ See page 40 – 41)
2: Available when the mode is set to [INFRASTRUCTURE]. _
Press [NEXT] after conguration is completed. Select [NEXT] if [WEP] is selected as the encryption method, and
select [STORE] if [OPEN] is selected. At this point, select [RETURN] to go back to the previous screen (1/2), or
select [CANCEL] to cancel the conguration change.
Note
IEEE802.1x is not supported.
Important video/audio data is protected because AES encryption processing takes place in advance for all
network numbers, even if [ENCRYPTION] is set to [NONE].
If [WEP] is selected as the encryption method, then perform the additional conguration below.
WIRELESS LAN
3/3
DEFAULT KEY
1
KEY1
KEY2
KEY3
KEY4
RETURN STORE CANCEL
MENU SELECT
CHANGE
When setting [OPEN] or [SHARED] as authentication and setting [WEP] as the encryption
method:
DEFAULT KEY
Set 1 – 4 numerals for the default key.
KEY1 – 4
Set these to match the WEP key registered in [DEFAULT KEY] and select [OK].
Either the 64-bit or 128-bit WEP key can be set. For the 64-bit key, input ve
alphanumerics (or a 10-digit string for the hexadecimal format) for the 128-bit key,
input 13 alphanumerics (or a 26-digit string for the hexadecimal format).
When using [WPA-PSK] or [WPA2-PSK] : Set key and select [OK].
Input either 8 to 63 alphanumerics or a 64 digit string in the hexadecimal format.
Note
If you are unable to connect to the wireless LAN through the access point even after performing the steps in
Projector settings (See page 19), contact the manufacturer of the access point.
14


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Panasonic PT-DZ570U at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Panasonic PT-DZ570U in the language / languages: English as an attachment in your email.

The manual is 8,5 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Panasonic PT-DZ570U

Panasonic PT-DZ570U User Manual - English - 95 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info