511534
106
Zoom out
Zoom in
Previous page
1/179
Next page
[PROJECTOR SETUP] menu
106 - ENGLISH
Settings
10)
Set [BRIGHTNESS CONTROL GAIN]
of all projectors to 100%.
11)
Set [BRIGHTNESS CONTROL GAIN]
of the darkest projector to 90%.
12)
Adjust [BRIGHTNESS CONTROL
GAIN] to match the [BRIGHTNESS
CONTROL GAIN] set to 90% of the
other projectors.
13)
Set [MODE] in [BRIGHTNESS
CONTROL SETUP] of all projectors to
[AUTO], and [LINK] to [GROUP A].
14)
Select [APPLY] in [BRIGHTNESS
CONTROL SETUP] on all projectors
and press the <ENTER> button.
z
Luminance control starts.
Note
z
Brightness is automatically corrected each time the
lamp blinks when the power is switched on or off.
z
Adjust luminance control again when variation in
brightness has increased or a lamp is replaced.
[STANDBY MODE]
Set the power consumption during the standby.
1) Press

to select [STANDBY MODE].
2) Press
󱚣󱚤
to switch [STANDBY
MODE].
z
The setting will change as follows each time
you press the button.
[NORMAL] [ECO]
Note
z
When set to [ECO], network functions and <SERIAL
OUT> terminal, and some RS-232C commands are
not available during standby. The lighting for the
connecting terminals and control panel does not
turn on.
z
When an error or warning occurs, a self diagnosis
is displayed on the control panel regardless of the
[STANDBY MODE] setting. (
page 25)
z
When set to [ECO], the time taken to start display
may be approximately ten seconds slower than
compared to when set to [NORMAL].
[SCHEDULE]
Set the command execution schedule for each day of
the week.
1) Press

to select [SCHEDULE].
2) Press
󱚣󱚤
to switch [SCHEDULE].
z
The setting will change as follows each time
you press the button.
[ON] [OFF]
Note
z
If [SCHEDULE] is set to [ON], the setting for
[STANDBY MODE] is automatically set to
[NORMAL] and cannot be changed. Even if
[SCHEDULE] is then set to [OFF] when in this
state, the setting of [STANDBY MODE] remains at
[NORMAL].
How to assign a program
3) Select [ON] in Step 2), and press the
<ENTER> button.
z
The [SCHEDULE] screen is displayed.
4) Select and assign program to each day
of week.
z
Press

to select the day of week, and press
󱚣󱚤
to select a program number.
z
You can set the program from No.1 to No.7. “-
- -” indicates that the program number has not
been set yet.
How to set a program
You can set up to 16 commands to each program.
3) Select [ON] in Step 2), and press the
<ENTER> button.
z
The [SCHEDULE] screen is displayed.
4) Press

to select [PROGRAM EDIT].
5) Press
󱚣󱚤
to select a program number
and then press the <ENTER> button.
6) Press

to select a command
number and press the <ENTER>
button.
z
You can change the page using
󱚣󱚤
.
7) Press

to select [TIME] and press
the <ENTER> button.
8) Press
󱚣󱚤
to select hour and minute,
and press

or the number (<0> to
<9>) buttons on the remote control
to set a time, and press the <ENTER>
button.
9) Press

to select [COMMAND].
106


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Panasonic PT-DZ21KE at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Panasonic PT-DZ21KE in the language / languages: English as an attachment in your email.

The manual is 17,72 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Panasonic PT-DZ21KE

Panasonic PT-DZ21KE User Manual - German - 190 pages

Panasonic PT-DZ21KE User Manual - German - 190 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info