598893
66
Zoom out
Zoom in
Previous page
1/130
Next page
ADVANCED MENU
66
- ENGLISH
Settings
To display the adjustment marker
J
Press ▲▼ to select [MARKER].7 )
Press ◄► to select [ON].8 )
A marker for adjusting the overlap position
z
appears. The optimal point is the position where
the red line of one frame overlaps the green
line of the other frame.
The blending widths of each projector must be
set to the same value. Optimal blending cannot
be achieved if the widths are different.
Press ▲▼ to select [BRIGHT 9)
ADJUST].
Press <ENTER> button.10)
The [BRIGHT ADJUST] screen will be
z
displayed.
Press ▲▼ to select [BRIGHT INSIDE].11)
Press <ENTER> button.12)
The [BRIGHT INSIDE] individual adjustment
z
screen will be displayed.
When [INTERLOCKED] is set to [OFF],
z
individual adjustment of [RED], [GREEN] and
[BLUE] will be possible.
Press ▲▼ to select an item, and 13)
press ◄► to adjust the setting.
Once adjustment is complete, press <MENU>
z
button to return to [BRIGHT ADJUST] screen.
Press ▲▼ to select the part of 14)
[UPPER], [LOWER], [RIGHT], [LEFT].
Press ◄► to adjust the width for 15)
correcting the [BRIGHT INSIDE]
setting (0 to 255).
Press ▲▼ to select [BRIGHT 16)
OUTSIDE].
Press <ENTER> button.17)
The [BRIGHT OUTSIDE] individual adjustment
z
screen will be displayed.
When [INTERLOCKED] is set to [OFF],
z
individual adjustment of [RED], [GREEN] and
[BLUE] will be possible.
Press ▲▼ to select an item, and 18)
press ◄► to adjust the setting.
Note
The [BRIGHT INSIDE] adjustments are used to match
z
the projector’s main-screen-area black levels to the level
within the blended area.
The [BRIGHT OUTSIDE] adjustments may be used to
ne adjust the thin borders on either side of the blend
area, but are often not needed.
When a rear screen or screen with a high gain is used,
z
the blended areas may appear to be discontinuous
depending on the viewing position.
When using both horizontal and vertical edge blending
z
functions to form a multiple projector image, adjust the
[BRIGHT BLENDING] before performing the adjustment
in Step 11).
When using only one of the horizontal or vertical edge
z
blending functions, set all items of [BRIGHT BLENDING]
to [0].
Red line
Green line
The optimal point is where these lines overlap.
BRIGHT
BLENDING
MAKER
BRIGHT OUTSIDE
Edge blending width (right)
BRIGHT adjustment (right)
BRIGHT INSIDE
Projection range
66


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Panasonic PT-DZ110X at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Panasonic PT-DZ110X in the language / languages: English as an attachment in your email.

The manual is 12,7 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Panasonic PT-DZ110X

Panasonic PT-DZ110X User Manual - German - 130 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info