511533
161
Zoom out
Zoom in
Previous page
1/187
Next page
Chapter 5Maintenance — Maintenance/replacement
ENGLISH - 161
How to replace the lamp unit
Attention
f When the projector is mounted on the ceiling, do not conduct work while your face is near the lamp unit.
f Do not remove or loosen the screws other than specied ones when replacing the lamp unit.
f Use same type of lamp unit for both lamps.
f When replacing the lamp unit, loosen the lamp unit cover xing screw while putting your hand on.
(i)
(ii)
Fig. 1
Fig. 2
Grooves for the guide to attach the lamp unit
Guide to attach the
lamp unit
Grooves for the guide to attach the lamp unit
Fig. 3
Lamp unit cover
Lamp unit cover fixing screw
Lamp unit 2
Handles
Lamp unit 1
Lamp unit fixing screws
Fan power connector
1) Set the <MAIN POWER> switch to <OFF> and disconnect the power plug from the power outlet.
f Wait at least one hour and check if the lamp unit has cooled down.
2) Remove the lamp unit cover. (Fig. 1)
i) Use a Phillips screwdriver to turn the lamp unit cover fixing screw (x1) counterclockwise until it turns freely, and open the lamp unit cover
slowly in the direction of the arrow.
f Opening the lamp unit cover quickly may result in damage to the cover.
f If you loosen the lamp unit cover xing screw with the projector installed upward in the vertical direction, the lamp unit cover may open
on its weight and the lamp unit may be dropped off.
ii) Hold the lamp unit cover securely and slide it in the direction of the arrow, and then pull it out backward to remove.
f Fan and other components are attached to the lamp unit cover; handle the removed lamp unit cover with care.
3) Remove the lamp unit. (Fig. 2)
f Use a Phillips screwdriver to turn the lamp unit xing screws (x2) counterclockwise until they turn freely, and then remove the lamp
unit.
f Hold the handles of the lamp unit and remove it in the horizontal direction.
f Do not remove the screws other than the lamp unit xing screws.
4) Push in the new lamp unit while paying attention to the insertion position. (Fig. 3)
f Push the guides to attach the lamp unit slowly into the projector body along the grooves for guide to attach the lamp unit.
f If the lamp unit is not installed properly, remove it and then push it in slowly. Pushing it in quickly or forcibly may break the connector.
161


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Panasonic PT-DZ10KE at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Panasonic PT-DZ10KE in the language / languages: English as an attachment in your email.

The manual is 20,54 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Panasonic PT-DZ10KE

Panasonic PT-DZ10KE User Manual - German - 198 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info