598901
171
Zoom out
Zoom in
Previous page
1/196
Next page
Chapter 5Maintenance — [SELF TEST] indications
ENGLISH - 171
[SELF TEST] indications
Details and measures for the alphanumeric symbols indicated in [SELF TEST] from the [PROJECTOR SETUP]
menu [STATUS] (x page 122) are as follows.
Self-test indication Details Measure
U04 Filter clog f Replace the air lter.
U11 Intake air temperature warning f The operating environment temperature is too
high. Install the projector in a location with the
operating environment temperature between 0 °C
(32 °F) and 45 °C (113 °F).
U12 Optical module temperature warning
U13 Exhaust air temperature warning
U14 Low temperature warning
f The operating environment temperature is too low.
Install the projector in a location with the operating
environment temperature between 0 °C (32 °F)
and 45 °C (113 °F).
U15 Light output limitation
f Install the projector in a location with the operating
environment temperature of 40 °C (104 °F) or
lower.
U21 Intake air temperature error f The operating environment temperature is too
high. Install the projector in a location with the
operating environment temperature between 0 °C
(32 °F) and 45 °C (113 °F).
U22 Optical module temperature error
U23 Exhaust air temperature error
U24 Low temperature error
f The operating environment temperature is too low.
Install the projector in a location with the operating
environment temperature between 0 °C (32 °F)
and 45 °C (113 °F).
U30 Portrait warning f Install the projector horizontally (within ±15°).
U41 Lamp 1 runtime warning f It will reach the lamp replacement time. Replace
the lamp unit.
U42 Lamp 2 runtime warning
U51 Lamp 1 failure
f Wait a while until the luminous lamp cools off, and
then turn on the power.
U52 Lamp 2 failure
U61 Lamp 1 runtime exceeded
f It has reached the lamp replacement time. Replace
the lamp unit.
U62 Lamp 2 runtime exceeded
U71 Lamp 1 not attached
f Attach the lamp unit.
U72 Lamp 2 not attached
U76 Air lter not attached f Attach the air lter case.
U81 Low AC voltage warning (below 90 V)
f The input power supply voltage is low. Use electric
wiring that can sufciently withstand the power
consumption of the projector.
U91 Cover open f Securely close the cover.
H01 Battery replacement for the built-in clock
f Battery replacement is required. Consult your
dealer.
H11 Intake air temperature sensor not present
f If the display does not clear after switching the
main power off and on, consult your dealer.
H12 Optical module temperature sensor not present
H13 Exhaust air temperature sensor not present
H14 Lamp 1 temperature sensor not present
H15 Lamp 2 temperature sensor not present
H18 Clog sensor not present
F00 Liquid cooling pump warning
f If the display does not clear after switching the
main power off and on, consult your dealer.
F11 Shutter error
F15 Brightness sensor error
F41 Lamp memory 1 not initialized
F42 Lamp memory 2 not initialized
F50 DMD fan warning
F51 Lamp 1 fan warning
F52 Lamp 2 fan warning
F53 Exhaust fan 1 warning
F54 Exhaust fan 2 warning
F55 Color wheel fan warning
F56 Power supply fan warning
F57 Ballast fan warning
F61 Ballast 1 communication error
F62 Ballast 2 communication error
171


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Panasonic PT-DX820 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Panasonic PT-DX820 in the language / languages: English as an attachment in your email.

The manual is 22,05 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Panasonic PT-DX820

Panasonic PT-DX820 User Manual - German - 201 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info