598898
164
Zoom out
Zoom in
Previous page
1/190
Next page
Chapter 5Maintenance — Troubleshooting
164 - ENGLISH
Troubleshooting
Review the following points. For details, see the corresponding pages.
Problems Points to be checked Page
Power does not turn on.
f Is the power plug rmly inserted into the outlet?
f Is the <MAIN POWER> switch set to <OFF>? 57
f Is the wall outlet supplying electricity?
f Have the circuit breakers tripped?
f Are the lamp indicator <LAMP1>/<LAMP2> or the temperature indicator <TEMP> lit
or ashing?
157
f Is the lamp unit cover attached? 162
No image appears.
f Are connections to external devices correctly performed? 49
f Is the input selection setting correct? 62
f Is the [BRIGHTNESS] adjustment setting at a minimum? 71
f Is the external device that is connected to the projector working properly?
f Is the shutter function in use? 61
f If the power indicator <ON (G)/STANDBY (R)> is ashing in red, consult your
dealer.
f Is the lens cover still attached to the lens? 55
Image is fuzzy.
f Is the lens focus set correctly? 58
f Is the projection distance appropriate? 33
f Is the lens dirty? 19
f Is the projector installed perpendicular to the screen?
Color is pale or grayish.
f Is [COLOR] or [TINT] adjusted correctly? 72
f Is the external device connected to the projector adjusted correctly? 49
f Is the RGB cable damaged?
Remote control does not
respond.
f Are the batteries depleted?
f Is the polarity of the batteries set correctly? 29
f Are there any obstructions between the remote control and the remote control
signal receiver of the projector?
25
f Is the remote control being used beyond its effective operation range? 25
f Are other forms of light, such as uorescent light, affecting the projection? 25
f Is the [REMOTE CONTROL] setting in [CONTROL DEVICE SETUP] set to
[DISABLE]?
131
f Is the <REMOTE 2 IN> terminal used for contact control? 176
f Is the ID number setting operation correct? 29
Menu screen does not
appear.
f Is the on-screen display function turned off (hidden)? 101
Buttons on the control
panel do not operate.
f Is the [CONTROL PANEL] setting in [CONTROL DEVICE SETUP] set to
[DISABLE]?
131
f Is the <REMOTE 2 IN> terminal used for contact control? 176
Image does not display
correctly.
f Is the [SYSTEM SELECTOR] selection set correctly? 76
f Is there a problem with the video tape or other image sources?
f Is a signal which is not compatible with the projector being input? 178
Image from a computer
does not appear.
f Is the cable too long? (Use D-Sub cables that are 10 m (32'10") or shorter.)
f Is the external video output on the laptop computer set correctly? (Ex.: The
external output settings may be switched by pressing “Fn” + “F3” or “Fn” + “F10”
simultaneously. Since the method varies depending on the computer type, refer to
the user manual provided with your computer.)
Image output from DVI-D
of the computer does not
appear.
f Is the [DVI-D IN] setting [EDID3] or [EDID2:PC]? 98
f The graphics accelerator driver of the computer may need to be updated to the
latest version.
f The computer may need to be restarted after performing the [DVI-D IN] setting. 98
Video from HDMI
compatible device does
not appear or it appears
jumbled.
f Is the HDMI cable connected securely? 49
f Turn the power of the projector and the external device on and off.
f Is a signal which is not compatible with the projector being input? 178
Cannot control the
projector with Art-Net.
f Are the connections between the twisted-pair-cable transmitter and the projector or
an external device correctly done?
f Is the [Art-Net] setting [ON]? 136
f Are the [PORT ADDRESS] and [START ADDRESS] settings correct? 136
164


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Panasonic PT-DX100U at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Panasonic PT-DX100U in the language / languages: English as an attachment in your email.

The manual is 21,08 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info