544151
160
Zoom out
Zoom in
Previous page
1/190
Next page
Chapter 5Maintenance — Maintenance/replacement
160 - ENGLISH
Cleaning the air lter
Remove the air lter beforehand with the previously described procedure of “Removing the air lter”.
1) Clean the air filter.
f Vacuum dust from the air lter with a vacuum cleaner.
Attaching the air lter
Fig. 1
Air filter (to the lamp unit 2)
Air filter case
Air filter (to the lamp unit 1)
1) Attach the air filter. (Fig. 1)
f Insert the air lter to the lter case rib securely.
2) Attach the air filter case to the projector.
f Push in the air lter case securely until the clicking sound is made.
3) Attach the lamp unit cover.
f Close the lamp unit cover in the reverse order of Step 1) of “Removing the air lter”.
f Attach the lamp unit cover so that the connector of the lamp unit cover is inserted to the fan power connector securely.
f Use a Phillips screwdriver to rmly tighten the lamp unit xing screw (x1).
f Make sure to attach the lamp unit cover securely.
Note
f Make sure that the air lter case is properly attached before using the projector. If it is not properly attached, the projector will suck in dirt
and dust causing a malfunction.
f If you use the projector without attaching the air lter case, the lter indicator <FILTER> ashes in red and the message appears on the
projection screen for approximately 30 seconds.
f Do not use water when washing the air lter. Washing with water may decrease the dust absorption capability.
f When the dust remains after cleaning, it is time to replace the air lter.
The air lter for replacement (TMZX5209) is an optional accessory (service part). To purchase the product, consult your dealer.
One air lter is provided for the optional Replacement lamp unit (Model No.: ET-LAD120 (1 pc)), and two air lters are provided for the
optional Replacement lamp unit (Model No.: ET-LAD120W (2 pcs)).
Replacing the unit
Lamp unit
The lamp unit is a consumable component. Refer to “When to replace the lamp unit” (x page 161) for details about the replacement cycle.
When purchasing the optional accessory of Replacement lamp unit (Model No.: ET-LAD120 (1 pc), ET-LAD120W (2 pcs)), consult your dealer.
It is recommended that you request a qualied technician to replace the lamp unit. Consult your dealer.
Warning
Replace the lamp unit after the lamp has cooled (after waiting at least one hour).
The high temperature inside the cover will cause burns.
160


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Panasonic PT-DW830EK at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Panasonic PT-DW830EK in the language / languages: English as an attachment in your email.

The manual is 21,13 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info