544151
157
Zoom out
Zoom in
Previous page
1/190
Next page
Chapter 5Maintenance — Lamp/temperature/lter indicators
ENGLISH - 157
Lamp/temperature/lter indicators
When an indicator lights up
If a problem should occur inside the projector, the lamp indicators <LAMP1>/<LAMP2>, the temperature indicator <TEMP>, and the lter
indicator <FILTER> will inform you by lighting or ashing. Check the status of the indicators and manage the indicated problems as follows.
Attention
f When switching off the projector to deal with problems, make sure to follow the procedure in “Switching off the projector” (x page 57).
Lamp indicator <LAMP1>
Lamp indicator <LAMP2>
Temperature indicator <TEMP>
Filter indicator <FILTER>
Lamp indicators <LAMP1>/<LAMP2>
Indicator status
Lighting in red/lighting in
orange
*1
Flashing in red
(1 time)
Flashing in red
(3 times)
Status
Time to replace the lamp
unit. (x page 161)
The lamp unit is not
installed.
A problem is detected in the lamp or the power supply for
the lamp.
Cause
f Was [REPLACE LAMP]
displayed when you
turned on the power?
f The indicator lights up
when the runtime of
the lamp unit reaches
2 800 hours (when
[LAMP POWER] is set to
[NORMAL]).
f Is the lamp unit attached?
f Have you turned on the
power again immediately
after turning it off?
f Some error has occurred
in the lamp circuit. Check
for uctuation (or drop) in
the source voltage.
Solution f Replace the lamp unit.
f Install the lamp unit if it is
not installed.
f If the indicator is still
ashing in red even when
having installed the lamp
unit, consult your dealer.
f Wait a while until the
luminous lamp cools
off, and then turn on the
power.
f Turn the <MAIN POWER>
switch to <OFF>
(x page 57), and
consult your dealer.
*1 The indicator lights up in red while the lamp is turned off, and lights up in orange while the lamp is turned on.
Note
f If the lamp indicators <LAMP1>/<LAMP2> are still lit or ashing after taking the preceding measures, ask your dealer for repair.
157


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Panasonic PT-DW830EK at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Panasonic PT-DW830EK in the language / languages: English as an attachment in your email.

The manual is 21,13 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info