544151
83
Zoom out
Zoom in
Previous page
1/190
Next page
Chapter 4Settings — [POSITION] menu
ENGLISH - 83
[KEYSTONE] [SUB KEYSTONE]
[LINEARITY]
Note
f The menu or logo may run off the screen when adjustments are performed with [KEYSTONE(3D)].
f Correcting up to ±40° for the tilt in the vertical direction is available in the adjustments with [KEYSTONE(3D)]. However, the image quality
will degrade and it will get harder to focus with more correction. Install the projector so that the correction will be as small as possible. (The
correction is ±30° when the xed-focus lens (Model No.: ET-DLE055) or ultra-short focus zoom lens (Model No.: ET-DLE085) is used.)
f Screen size will also change when [KEYSTONE(3D)] is used to perform various adjustments.
f When the keystone is corrected with [KEYSTONE(3D)], the edge blending cannot be adjusted together.
f Aspect ratio of the image size may shift depending on the correction or lens zoom value.
f [KEYSTONE(3D)] is selectable only when a 3D image is displayed. The setting is invalid while a 2D image is displayed.
However, when [DUAL (LEFT)] or [DUAL (RIGHT)] is set to [3D SYSTEM SETTING], [KEYSTONE(3D)] cannot be selected.
f When executing the keystone correction while displaying a 2D image, set with [GEOMETRY(2D)].
[KEYSTONE]
(Only for PT-DW830E, PT-DX100E)
You can correct the keystone distortion that occurs when the projector is installed tilted or when the screen is tilted.
1) Press as to select [KEYSTONE].
2) Press the <ENTER> button.
f The [KEYSTONE] screen is displayed.
3) Press as to select the item to adjust.
4) Press qw to adjust.
[KEYSTONE] [SUB KEYSTONE]
[LINEARITY]
Note
f The menu or logo may run off the screen when adjustments are performed with [KEYSTONE].
f Correcting up to ±40° for the tilt in the vertical direction is available for adjustments with [KEYSTONE]. However, the image quality will
degrade and it will get harder to focus with more correction. Install the projector so that the correction will be as small as possible. (The
correction is ±30° when the xed-focus lens (Model No.: ET-DLE055) or ultra-short focus zoom lens (Model No.: ET-DLE085) is used.)
f Screen size will also change when [KEYSTONE] is used to perform various adjustments.
f When the keystone is corrected with [KEYSTONE], the edge blending cannot be adjusted together.
f Aspect ratio of the image size may shift depending on the correction or lens zoom value.
83


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Panasonic PT-DW830EK at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Panasonic PT-DW830EK in the language / languages: English as an attachment in your email.

The manual is 21,13 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info