548352
77
Zoom out
Zoom in
Previous page
1/108
Next page
[NETWORK] menu
ENGLISH - 77
Settings
Error information page
When [Error (Detail)] is displayed on the [Projector status] screen, click it to display the error details.
z
The projector may go into the standby status to protect the projector depending on the contents of the
error.
[OK]: Normal operation
[FAILED]: Occurrence of trouble
z
Description of problem occurrence [FAILED]:
Parameter Description
[MAIN CPU BUS]
There is a problem with the microcomputer circuitry. Consult your
dealer.
[FAN]
There is a problem with the fan or the fan drive circuit. Consult your
dealer.
[INTAKE AIR TEMPERATURE]
The air intake temperature is too high. It may be used in an operating
environment where the temperature is high, such as near a heating
appliance.
[OPTICS MODULE TEMPERATURE]
The temp
erature inside the projector is high. It may be used in an
o
perating environment where the temperature is high, such as near a
heating appliance.
[AROUND LAMP TEMPERATURE]
The temperature around the lamp is high. The air exhaust port may
be blocked.
[LAMP1 REMAIN TIME]
The usage time of the lamp has exceeded the specied time, and it is
time to replace the lamp.
[LAMP2 REMAIN TIME]
[LAMP1 STATUS]
The l
amp has failed to turn on. Wa
it a while until the luminous lamp
cools off, and then turn on the power.
[LAMP2 STATUS]
[SHUTTER] There is a problem with the shutter circuitry. Consult your dealer.
[INTAKE AIR TEMP.SENSOR]
There is a problem with the sensor used to detect intake air
temperature. Consult your dealer.
[OPTICS MODULE TEMP.SENSOR]
There is a problem with the sensor used to detect temperat
ure inside
t
he projector. Consult your dealer.
[AROUND LAMP TEMP. SENSOR]
There is a problem with the sensor used to detect exhaust air
temperature. Consult your dealer.
[BATTERY] The battery replacement is required. Consult your dealer.
[AIRFLOW SENSOR]
There is a problem with the air volume sensor.
Consult your dealer.
[COLOR WHEEL]
There is a problem with the color wheel or the color wheel drive
circuit. Consult your dealer.
[COVER OPEN]
The attachment of the lamp unit cover is incomplete. Check the lamp
unit cover. (
page 92)
[FILTER UNIT] The air lter unit is not attached. Check the air lter unit. (
page 90)
[AIR FILTER]
There are too much dust accumulated in the air lter unit.
Set the <MAIN POWER> switch (
page 35) to <OFF>, and clean the
air lter (
page 89).
77


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Panasonic PT-DW730UK at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Panasonic PT-DW730UK in the language / languages: English as an attachment in your email.

The manual is 12,32 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info