543723
78
Zoom out
Zoom in
Previous page
1/132
Next page
78 - ENGLISH
Chapter 4 Settings — [PROJECTOR SETUP] menu
[ECO] Set when high luminance is not required.
Note
rf
When [ECO] is set, the power consumption and operation sound can be reduced while the lamp life can be increased.
[STANDBY MODE]
Set the power consumption during the standby.
1)
Press as to select [STANDBY MODE].
2)
Press qw to switch [STANDBY MODE].
rf
The setting will change between [NORMAL] and [ECO] each
time you press the button.
rr
[STANDBY MODE]
[NORMAL] Normally use this setting.
[ECO] Use this setting to reduce power consumption during standby.
Note
rf
When set to [ECO], network functions and <SERIAL OUT> terminal are not available during standby. Also, some RS-232C commands are
not available. When set to [NORMAL], network functions and <SERIAL OUT> terminal are available during standby.
rf
If set to [ECO], there may be a time lag of approximately 10 seconds between turning on the power and starting projection compared to
when the setting is [NORMAL].
[SCHEDULE]
Set the command execution schedule for each day of the week.
Enabling/disabling the schedule function
1)
Press as to select [SCHEDULE].
2)
Press qw to switch [SCHEDULE].
rf
The setting will change between [OFF] and [ON] each time you
press the button.
rr
[SCHEDULE]
[OFF] Disables the schedule function.
[ON]
Enables the schedule function. Refer to “How to assign a program” (
x
page 78) or “How to set a
program” (
x
page 78) in regard to how to set the schedule.
Note
rf
When [SCHEDULE] is set to [ON], the [STANDBY MODE] setting is forcibly switched to [NORMAL], and the setting cannot be changed.
Even if [SCHEDULE] is then set to [OFF] when in this state, the setting of [STANDBY MODE] remains at [NORMAL].
How to assign a program
1)
Press as to select [SCHEDULE].
2)
Press qw to select [ON], and press the
<ENTER> button.
rf
The [SCHEDULE] screen is displayed.
3)
Select and assign program to each day of
week.
rf
Press
as
to select the day of week, and press
qw
to select a
program number.
rf
You can set the program from No.1 to No.7. “- - -” indicates that
the program number has not been set yet.
How to set a program
You can set up to 16 commands to each program.
1)
Press as to select [SCHEDULE].
2)
Press qw to select [ON], and press the
<ENTER> button.
rf
The [SCHEDULE] screen is displayed.
3)
Press as to select [PROGRAM EDIT].
4)
Press qw to select a program number and
then press the <ENTER> button.
5)
Press as to select a command number and
press the <ENTER> button.
rf
You can change the page using
qw
.
6)
Press as to select [TIME], and press the
<ENTER> button.
78


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Panasonic PT-DW640E at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Panasonic PT-DW640E in the language / languages: English as an attachment in your email.

The manual is 16,63 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Panasonic PT-DW640E

Panasonic PT-DW640E User Manual - German - 140 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info