543723
66
Zoom out
Zoom in
Previous page
1/132
Next page
66 - ENGLISH
Chapter 4 Settings — [ADVANCED MENU] menu
7)
Press qw to switch [ON].
rf
A marker for image position adjustment is displayed.
8)
Press as to select [START] or [WIDTH],
then press qw to adjust starting point and
correction width.
rf
The green line is the starting point of edge blending adjusted
with [START]. The red line is the ending point of edge blending
adjusted with [WIDTH]. The position where the red and green
lines overlap for the sets to join will be the optimal point.
Make sure to set the correction width for the sets to join as the
same value. Optimal joining is not possible with the sets with
different correction widths.
7KHRSWLPDOSRLQWLVWKHSRLQWDWZKLFKWKHVHOLQHVRYHUODS
*UHHQOLQH
5HGOLQH
9)
Press as to select [GAMMA].
10)
Press qw to switch [GAMMA].
rf
The setting will change among [2.2], [1.8], and [2.0] each time
you press the button.
11)
Press as to select [BRIGHT ADJUST].
12)
Press the <ENTER> button.
rf
The [BRIGHT ADJUST] screen is displayed.
13)
Press as to select [BRIGHT INSIDE].
14)
Press the <ENTER> button.
rf
The [BRIGHT INSIDE] individual adjustment screen is
displayed.
rf
If [INTERLOCKED] is set to [OFF], [RED], [GREEN], and [BLUE]
can be adjusted individually.
15)
Press as to select an item, then press qw to
adjust it.
rf
Once the adjustment is completed, press the <MENU> button to
return to the [BRIGHT ADJUST] screen.
16)
Press as to select [UPPER], [LOWER], [LEFT],
or [RIGHT] from [OUTSIDE AREA].
17)
Press qw to set the region (width) of the
[BRIGHT INSIDE] adjustment.
18)
Press as to select [BRIGHT OUTSIDE].
19)
Press the <ENTER> button.
rf
The [BRIGHT OUTSIDE] individual adjustment screen is
displayed.
rf
If [INTERLOCKED] is set to [OFF], [RED], [GREEN], and [BLUE]
can be adjusted individually.
20)
Press as to select an item, then press qw to
adjust it.
>2876,'($5($@5LJKW
3URMHFWLRQUDQJH
(GJHEOHQGLQJ>:,'7+@5LJKW
>0$5.(5@5HG
(GJHEOHQGLQJ>67$57@5LJKW
>0$5.(5@*UHHQ
>%5,*+72876,'(@
>%5,*+7,16,'(@
rr
[EDGE BLENDING]
[OFF] Sets the edge blending function to off.
[ON] Use the setting value of the internal distortion of the set for the inclination of the edge blending area.
rr
[GAMMA]
[2.2]
The screen becomes darker as the value increases. Set this item according to the condition of the joined
part.
[1.8]
[2.0]
Note
rf
[BRIGHT ADJUST] is a function that makes the increased brightness in black level of the overlapping image area difcult to notice when
[EDGE BLENDING] is used to congure multiple screens. The optimal point of the correction is set by adjusting [BRIGHT INSIDE] so the
black level of the overlapping image area will be the same level as the non-overlapping area. If the bordering part of the part where the
image is overlapping and the non-overlapping part gets brighter after adjusting [BRIGHT INSIDE], adjust the width of the top, bottom, left, or
right. Adjust [BRIGHT OUTSIDE] when the width adjustment makes only the border area darker.
rf
The joining part may look discontinuous depending on the position you are looking from when a screen with high gain or rear screen is used.
[RASTER POSITION]
This will allow the position of the image to move within the display area arbitrarily when the input image is not using the whole display area.
1)
Press as to select [RASTER POSITION].
2)
Press the <ENTER> button.
rf
The [RASTER POSITION] screen is displayed.
3)
Press asqw to adjust the position.
66


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Panasonic PT-DW640E at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Panasonic PT-DW640E in the language / languages: English as an attachment in your email.

The manual is 16,63 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Panasonic PT-DW640E

Panasonic PT-DW640E User Manual - German - 140 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info