543723
49
Zoom out
Zoom in
Previous page
1/132
Next page
ENGLISH - 49
Chapter 3 Basic Operation — Remote control operation
1)
Press the <AUTO SETUP> button.
rf
[COMPLETE] is displayed when it has completed without any
problem.
rf
This operation can be also performed using the <AUTO
SETUP> button on the control panel.
Note
rf
The CLOCK PHASE may shift even if it has completed without any incident. In such cases, adjust with the [POSITION] menu
[CLOCK
PHASE] (
x
page 62).
rf
If an image with blurred edges or a dark image is input, [INCOMPLETE] may appear or adjustment may not be performed properly even if
[COMPLETE] appears. In this case, adjust the settings in [ADVANCED MENU]
[INPUT RESOLUTION] (
x
page 65), [POSITION]
[CLOCK PHASE] (
x
page 62), [SHIFT](
x
page 60) in the menu.
rf
Adjust special signals according to the [DISPLAY OPTION]
[AUTO SETUP] (
x
page 70) in the menu.
rf
Automatic adjustment may not work depending on the model of the computer.
rf
Automatic adjustment may not work for a synchronization signal of C-SY or SYNC ON GREEN.
rf
Images may be disrupted for a few seconds during automatic adjustment, but it is not a malfunction.
rf
Adjustment is required for each input signal.
rf
Automatic adjustment can be canceled by pressing the <MENU> button during the automatic adjustment operation.
rf
If automatic setup function is performed while moving images are being input, the adjustment may not be performed properly even for
an RGB signal for which automatic setup can be used. [INCOMPLETE] may appear, or adjustment may not be nished properly even if
[COMPLETE] appears.
Using the function button
[DISABLE], [SUB MEMORY], [SYSTEM SELECTOR], [SYSTEM DAYLIGHT VIEW], [FREEZE], [SIDE BY SIDE] or [ASPECT] operations can
be assigned to the <FUNCTION> button on the remote control so that it can be used as an easy shortcut button.
button
1)
Press the <FUNCTION> button.
Note
rf
[SIDE BY SIDE] can be set only with PT-DW640E.
rf
The [PROJECTOR SETUP]
[FUNCTION BUTTON] (
x
page 82) in the menu performs function assignment.
Displaying the internal test pattern
The projector has nine types of internal test patterns to check the condition of the set. To display test patterns, perform the following steps.
button
1)
Press the <TEST PATTERN> button.
2)
Use qw to select a test pattern.
Note
rf
You can also use [TEST PATTERN] (
x
page 85) in the menu to perform settings.
rf
Settings of position, size, and other factors will not be reected in test patterns. Make sure to display the input signal before performing
various adjustments.
49


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Panasonic PT-DW640E at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Panasonic PT-DW640E in the language / languages: English as an attachment in your email.

The manual is 16,63 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Panasonic PT-DW640E

Panasonic PT-DW640E User Manual - German - 140 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info