543723
42
Zoom out
Zoom in
Previous page
1/132
Next page
42 - ENGLISH
Chapter 3 Basic Operation — Switching on/off the projector
Power indicator
Displays the status of the power. Check the <ON (G)/STANDBY (R)> status of the power indicator before operating the projector.
3RZHULQGLFDWRU21*67$1'%<5!
Indicator status Status
No illumination or ashing The main power is switched off.
Red Lit
The power is switched off. (Standby mode.)
Projection will start if the power on <
b
> button is pressed.
rf
The projector may not operate when the lamp indicators <LAMP1>/<LAMP2> or
temperature indicator <TEMP> is ashing. (
x
page 110)
Green Lit Projecting.
Orange Lit
The projector is preparing to switch off the power.
The power is switched off after a while. (Changes to the standby mode.)
Note
rf
When the power indicator <ON (G)/STANDBY (R)> lamp is lit in orange, the fan is turning and the projector is cooling.
rf
The projector consumes power even in standby mode (power indicator <ON (G)/STANDBY (R)> is lit in red).
Refer to “Power consumption” (
x
page 128) for the power consumption.
rf
The power indicator <ON (G)/STANDBY (R)> will ash in green if a remote control signal is received.
rf
The power indicator <ON (G)/STANDBY (R)> will ash slowly in green while the shutter is closed. (
x
page 47)
rf
If the power indicator <ON (G)/STANDBY (R)> is ashing in red, consult your dealer.
Switching on the projector
1)
3)
2)
3)
To use a projection lens that is an optional accessory, attach the lens before switching on the projector. (
x
page 35)
Remove the lens cover rst.
1)
Connect the power plug to an outlet.
rf
(AC 220 V - 240 V 50 Hz/60 Hz)
2)
Press the <ON> side of the <MAIN POWER>
switch to turn on the power.
rf
The power indicator <ON (G)/STANDBY (R)> will light in red,
and the projector will enter the standby mode.
3)
Press the power on <b> button.
rf
The power indicator <ON (G)/STANDBY (R)> will light in green
and the image will soon be projected on the screen.
Note
rf
If the projector is switched on at about 0
°C (32
°F), a warm-up period of approximately ve minutes may be necessary until a projection is displayed.
The temperature indicator <TEMP> is lit during the warm-up period. When the warm-up is completed, the temperature indicator <TEMP>
turns off and the projection starts. Refer to “Managing the indicated problems” (
x
page 110) for the indicator status.
rf
If the operating environment temperature is low and warm-up takes more than 5 minutes, the projector will judge that a problem has
occurred and the power will automatically be set to stand-by. If this happens, increase the operating environment temperature to 0 °C (32 °F)
or higher, turn off the main power, and then turn on the power again.
42


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Panasonic PT-DW640E at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Panasonic PT-DW640E in the language / languages: English as an attachment in your email.

The manual is 16,63 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Panasonic PT-DW640E

Panasonic PT-DW640E User Manual - German - 140 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info