543723
37
Zoom out
Zoom in
Previous page
1/132
Next page
ENGLISH - 37
Chapter 2 Getting Started — Connections
Connections
Before connecting to the projector
rf
Before connecting, carefully read the operating instructions for the external device to be connected.
rf
Turn off the power of all devices before connecting cables.
rf
Acquire any connection cable necessary to connect the external device to the system that is either not supplied with the device or not
available as an option.
rf
Video signals containing too much jitter may cause the images on the screen to randomly wobble or wafture. In this case, a time base
corrector (TBC) must be connected.
rf
The projector accepts video signals, S video signals, analog RGB signals (synchronous signals are TTL level), and digital signals.
rf
Some computer models are not compatible with the projector.
rf
Use a cable compensator when you connect devices to the projector using long cables. Otherwise the image may not display properly.
rf
Refer to “List of compatible signals” (
x
page 125) for the types of video signals that can be used with the projector.
<S-VIDEO IN> terminal pin assignments and signal names
Outside view Pin No. Signal name
(1) (2)
(3) (4)
(1) Ground (luminance signal)
(2) Ground (color signal)
(3) Luminance signal
(4)
Color signal
<RGB 2 IN> terminal pin assignments and signal names
Outside view Pin No. Signal name
(10)
(6)
(1) (5)
(1) R/P
R
(4) and (9) are not used.
(5) - (8), (10), and (11) are GND terminals.
(2) G/Y
(3) B/P
B
(12) DDC data
(13) SYNC/HD
(14) VD
(15) DDC clock
<DVI-D IN> terminal pin assignments and signal names
Outside view Pin No. Signal name Pin No. Signal name
(17)(24)
(16) (9)
(1)(8)
(1) T.M.D.S data 2
-
(13)
(2) T.M.D.S data 2+ (14) +5 V
(3) T.M.D.S data 2/4 shield (15) GND
(4) (16) Hot plug detection
(5) (17) T.M.D.S data 0
-
(6) DDC clock (18) T.M.D.S data 0+
(7) DDC data (19) T.M.D.S data 0/5 shield
(8) (20)
(9) T.M.D.S data 1
-
(21)
(10) T.M.D.S data 1+ (22) T.M.D.S clock shield
(11) T.M.D.S data 1/3 shield (23) T.M.D.S clock+
(12) (24) T.M.D.S clock
-
<HDMI IN> terminal pin assignments and signal names
Outside view Pin No. Signal name Pin No. Signal name
Even-numbered pins (2) to (18)
(1) (19)
(2) (18)
Odd-numbered pins (1) to (19)
(1) T.M.D.S data 2+ (11) T.M.D.S clock shield
(2) T.M.D.S data 2 shield (12) T.M.D.S clock
-
(3) T.M.D.S data 2
-
(13) CEC
(4) T.M.D.S data 1+ (14)
(5) T.M.D.S data 1 shield (15) SCL
(6) T.M.D.S data 1
-
(16) SDA
(7) T.M.D.S data 0+ (17)
DDC/CEC
GND
(8) T.M.D.S data 0 shield (18) +5 V
(9) T.M.D.S data 0
-
(19) Hot plug detection
(10) T.M.D.S clock+
37


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Panasonic PT-DW640E at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Panasonic PT-DW640E in the language / languages: English as an attachment in your email.

The manual is 16,63 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Panasonic PT-DW640E

Panasonic PT-DW640E User Manual - German - 140 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info