598890
86
Zoom out
Zoom in
Previous page
1/129
Next page
PROJECTOR SETUP menu
86
- ENGLISH
Settings
SAVE ALL USER DATA
This saves various setting values as a backup to the
internal memory of the projector.
Press ▲▼ to select [SAVE ALL USER 1 )
DATA].
Press <ENTER> button.2 )
The [SECURITY PASSWORD] screen will be
z
displayed.
Enter the password set for the 3 )
[SECURITY PASSWORD].
The conrmation screen will be displayed.
z
Press ◄► to select [OK], and press 4 )
<ENTER> button.
LOAD ALL USER DATA
This loads various setting values that were saved as a
backup to the internal memory of the projector.
Press ▲▼ to select [LOAD ALL USER 1 )
DATA].
Press <ENTER> button.2 )
The [SECURITY PASSWORD] screen will be
z
displayed.
Enter the password set for the 3 )
[SECURITY PASSWORD].
The conrmation screen will be displayed.
z
Press ◄► to select [OK], and press 4 )
<ENTER> button.
Note
If this is executed, the projector enters a standby state in
z
order to reect the setting values.
INITIALIZE
This returns various setting values to their factory
default settings.
Press ▲▼ to select [INITIALIZE].1 )
Press <ENTER> button.2 )
The [SECURITY PASSWORD] screen will be
z
displayed.
Enter the password set for the 3 )
[SECURITY PASSWORD].
The [INITIALIZE] screen will be displayed.
z
Press ▲▼ to select the desired 4 )
initialize item.
ALL USER
DATA
All setting values including [ENTRY
SIGNAL], [NETWORK/E-MAIL], and
[LOGO IMAGE] are returned to their
factory default values.
The projector enters a standby state
in order to reect the setting values.
ENTRY
SIGNAL
All setting values saved for each of
the input signals are cleared.
To clear just some registered
signals, perform the procedure
described in “Deleting a registered
data” (
Æ
page 89).
NETWORK/
E-MAIL
All setting values in [NETWORK
SETUP] and [E-mail setup] settings
will return to factory settings.
LOGO IMAGE
The registered image data for
[LOGO1] will return to factory
settings.
Press <ENTER> button.5 )
The conrmation screen will be displayed.
z
Press ◄► to select [OK], and press 6 )
<ENTER> button.
SERVICE PASSWORD
This function is used by a service person.
86


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Panasonic PT-DS8500 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Panasonic PT-DS8500 in the language / languages: English as an attachment in your email.

The manual is 12,55 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info