598890
41
Zoom out
Zoom in
Previous page
1/129
Next page
ENGLISH -
41
Basic Operation
Projecting
Check the connections of the peripheral devices, installation of the projection lens (
Æ
page 37), and connection
of the power cord (
Æ
page 38) and switch on the power (
Æ
page 39) to start the projector. Select the input signal
and adjust the image.
Selecting the input signal
Select an input signal.
The image selected with <INPUT SELECT> button is
projected. (
Æ
page 46)
Attention
Images may not be projected properly depending on the
z
connected device and DVD, video tape, etc. to be played.
Select a system format that is suitable for the input signal
using the [SYSTEM SELECTOR] in the [PICTURE] menu
(
Æ
page 57).
Check the aspect ratios of the screen and the image and
z
select the optimum aspect ratio using [ASPECT] in the
[PICTURE] menu (
Æ
page 58).
How to adjust the focus,
zoom and shift
Use the Lens Shift, Zoom, and Focus controls to
properly frame the image on the screen.
J
At the projector
Press <LENS> button on the control 1 )
panel.
Pressing the button changes the setup screen
z
in the order of [FOCUS], [ZOOM] and [SHIFT].
Press ▲▼◄► to select an item and 2 )
adjust it.
J
Using the remote control
Press <LENS> (FOCUS, ZOOM, SHIFT) 1 )
button on the remote control.
Press <FOCUS> button :
z
Adjust focus.
Press <ZOOM> button :
z
Adjust zoom.
Press <SHIFT> button :
z
Adjust focus.
Press ▲▼◄► to select an item and 2 )
adjust it.
Note
Be careful not to catch your ngers between the lens and
z
shroud when shifting the lens.
The zoom adjustment menu will be displayed only when
z
a lens with zoom function is installed.
When using ET-D75LE5, set the shift to the home
z
position.
The adjustment can be performed faster by pressing and
z
holding the ▲▼◄► for about 7 seconds or more.
It is recommended that the images are projected
z
continuously for at least 30 minutes before the focus is
adjusted.
If the power is turned off during focus or shift adjustment,
z
the LENS CALIBRATION must be performed when the
power is turned on next time.
If the main power is turned off during focus adjustment,
z
the LENS CALIBRATION will be performed automatically
when the focus is adjusted next time.
If the main power is turned off during shift adjustment,
z
“LENS CALIBRATION ERROR” is displayed when the
shift is adjusted next time. Please perform the [LENS
CALIBRATION] from the menu (
Æ
page 85)
If “LENS CALIBRATION ERROR” is still displayed after
z
the LENS CALIBRATION is performed, ask your dealer
for repair.
41


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Panasonic PT-DS8500 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Panasonic PT-DS8500 in the language / languages: English as an attachment in your email.

The manual is 12,55 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info