532618

Panasonic PT-DS20KU Manual

108
Zoom out
Zoom in
Previous page
1/186
Next page
[PROJECTOR SETUP] menu
108 - ENGLISH
Settings
z
Error details
Error message Remedy
[Exceed maximum
number of projectors.]
z
Set no more than eight
projectors in one group.
z
Use a computer and
the dedicated “Multi
Projector Monitoring &
Control Software”
*1
to
connect nine or more
projectors.
[Please check the
COMMAND CONTROL
setting.]
z
Set the on-screen menu
[NETWORK CONTROL]
[COMMAND CONTROL]
to [ON] for the projector
in error.
z
Set the [NETWORK
CONTROL] [COMMAND
PORT] of all projectors
to be connected to the
same value.
[Please check the
USER NAME and
PASSWORD in the
COMMAND CONTROL
setting.]
z
Set the same character
string to the [User
name] and [Password]
that has Web control
administrator rights
for all projectors to be
connected.
[Cannot apply
BRIGHTNESS
CONTROL. Please
check projector status.]
z
The projector is in
standby status. Switch
on the projector.
[Brightness Sensor
Error]
z
There is a problem with
the luminance sensor.
If the problem is not
corrected by turning off
the power and turning it
on again, consult your
dealer.
*1: “Multi Projector Monitoring & Control Software” is included
in the attached CD-ROM.
Note
z
Check the following when a projector to be
connected is not listed.

Is there a device on the network with the same IP
address?

Is a LAN cable connected correctly? (
page 130)

Is the projector subnet identical?

Is [LINK] set to the same group?
z
To change a projector name, refer to [NETWORK
SETUP] (
page 128), or [Network cong] page
(
page 137).
z
When [MODE] in [BRIGHTNESS
CONTROL SETUP] is [PC]
0(18
5(7851
02'(
352-(&725
3&
%5,*+71(66&21752/67$786
(1) Displays the name of the projector in question.
(2) Uses color to display status.
Green
:
There is margin for brightness correction.
Yellow
:
There is less margin for brightness correction.
Red: An error occurred in luminance control.
■
Example steps to adjust
luminance control
The steps exemplify an adjustment to link the
brightness of eight projectors connected in a network.
1) Use a LAN cable to connect all
projectors to a hub. (
page 130)
2) Switch on all projectors.
3) Set [LAMP SELECT] to either [DUAL]
or [SINGLE] for all projectors.
4) Set [MODE] in [BRIGHTNESS
CONTROL SETUP] to [OFF] and
[APPLY].
5) Set [SUBNET MASK] of the projectors
to the same value, and [IP ADDRESS]
of each projector to a different value
so that the network can communicate.
6) Wait at least eight minutes until the
lamp brightness becomes steady.
7) Set all items in the [PICTURE] menu of
all projectors to the same values.
8) To match colors, adjust [COLOR
MATCHING].
9) Display the internal test patterns of all
projectors in “completely white”.
… 108 …


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Panasonic PT-DS20KU at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Panasonic PT-DS20KU in the language / languages: English as an attachment in your email.

The manual is 18,56 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Panasonic PT-DS20KU

Panasonic PT-DS20KU User Manual - German - 190 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info