532618
103
Zoom out
Zoom in
Previous page
1/186
Next page
[PROJECTOR SETUP] menu
ENGLISH - 103
Settings
[COOLING CONDITION]
Change the fan control depending on the direction of
projection.
Set [COOLING CONDITION] according to the
projection direction, but set it to [AUTO] normally.
Using the projector with [COOLING CONDITION] set
incorrectly may shorten the life of the lamp.
1) Press

to select [COOLING
CONDITION].
2) Press the <ENTER> button.
z
The [COOLING CONDITION] screen is displayed.
3) Press

to select a cooling condition.
z
When [AUTO] is selected, the cooling conditions
of [FLOOR SETTING], [CEILING SETTING],
[VERTICAL UP SETTING], and [VERTICAL
DOWN SETTING] are set automatically.
You can check the setting from [COOLING
CONDITION] on the [STATUS] screen.
[VERTICAL UP
SETTING]
[FLOOR
SETTING]
[CEILING
SETTING]
[VERTICAL DOWN
SETTING]
Projection direction
4) Press the <ENTER> button.
5) When the conrmation is displayed,
select [OK] or [CANCEL], and press
the <ENTER> button.
Note
z
Cannot be set when using the optional accessory
replacement lamp unit (for portrait mode) (Model
No.: ET-LAD510P (1 pc), ET-LAD510PF (4 pcs))
(xed to [PORTRAIT SETTING]).
[HIGH ALTITUDE MODE]
Set to [ON] to use the projector at 1 400 m (4 593 ft)
to 2 700 m (8 858 ft) elevations.
1) Press

to select [HIGH ALTITUDE
MODE].
2) Press
󱚣󱚤
to switch [HIGH ALTITUDE
MODE].
[OFF] [ON]
[OFF]
When using at a place lower than
1 400 m (4 593 ft) above sea level
[ON]
When using at a high altitude
(1 400 m (4 593 ft) or higher and
lower than 2 700 m (8 858 ft) above
sea level)
3) When the conrmation is displayed,
select [OK] or [CANCEL], and press
the <ENTER> button.
Note
z
The speed of the fan increases and the operation
sound becomes louder when set to [ON].
z
This item cannot be set when using the optional
smoke cut lter. (Setting is xed to [OFF].) Use the
projector at a place lower than 1 400 m (4 593 ft)
above sea level.
[LAMP SELECT]
Select luminous lamps from the four equipped in the
projector body to turn on for a certain use condition or
purpose.
1) Press

to select [LAMP SELECT].
2) Press
󱚣󱚤
to switch [LAMP SELECT].
z
The setting will change as follows each time
you press the button.
[L1] [L2]
[QUAD] (4 lit) [L3]
[TRIPLE] (3 lit) [L4]
[DUAL] (2 lit) [L1/L4]
[SINGLE] (1 lit) [L2/L3]
[L2/L3/L4] [L1/L2/L3]
[L1/L3/L4] [L1/L2/L4]
103


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Panasonic PT-DS20KU at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Panasonic PT-DS20KU in the language / languages: English as an attachment in your email.

The manual is 18,56 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Panasonic PT-DS20KU

Panasonic PT-DS20KU User Manual - German - 190 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info