532618
70
Zoom out
Zoom in
Previous page
1/186
Next page
[PICTURE] menu
70 - ENGLISH
Settings
[GAMMA]
Switch gamma mode.
1) Press

to select [GAMMA].
2) Press
󱚣󱚤
or the <ENTER> button.
z
The [GAMMA] individual adjustment screen is
displayed.
3) Press
󱚣󱚤
to switch the [GAMMA].
z
The setting will change as follows each time
you press the button.
[DEFAULT]*
1
[USER1]
[2.8] [USER2]
[DICOM SIM.]
(0.1 increments)
[1.0]
[2.0] [1.8]
*1: When [PICTURE MODE] is set to [DYNAMIC], [USER], or
[DICOM SIM.], [DEFAULT] cannot be selected.
Note
z
DICOM is an abbreviation of “Digital Imaging and
COmmunication in Medicine” and is a standard
for medical imaging devices. Although the DICOM
name is used, the projector is not a medical device,
and should not be used for purposes such as
diagnosis of display images.
To change the name of [USER1]
or [USER2]
4) Select [USER1] or [USER2] in Step 3).
5) Press the <ENTER> button.
z
The [GAMMA] screen is displayed.
6) Press the <ENTER> button.
z
The [GAMMA NAME CHANGE] screen is
displayed.
7) Press
󱚣󱚤
to select the character,
and press the <ENTER> button to
enter the character.
8) Press
󱚣󱚤
to select [OK], and
press the <ENTER> button.
z
The Select Gamma name is changed.
Note
z
When a name is changed, display of [USER1] and
[USER2] on the menu is also changed.
[SYSTEM DAYLIGHT VIEW]
You can correct the image to the optimal vividness
even if it is projected under a bright light.
1) Press

to select [SYSTEM
DAYLIGHT VIEW].
2) Press
󱚣󱚤
or the <ENTER> button.
z
The [SYSTEM DAYLIGHT VIEW] individual
adjustment screen is displayed.
3) Press
󱚣󱚤
to switch the [SYSTEM
DAYLIGHT VIEW].
z
The setting will change as follows each time
you press the button.
[OFF] (No
correction)
[1] (Low)
[3] (High) [2] (Medium)
[SHARPNESS]
You can adjust the sharpness of the projected image.
1) Press

to select [SHARPNESS].
2) Press
󱚣󱚤
or the <ENTER> button.
z
The [SHARPNESS] individual adjustment
screen is displayed.
3) Press
󱚣󱚤
to adjust the level.
Operation Adjustment
Adjustment
range
Press
󱚤
.
Contours become
sharper.
0 - 15
Press
󱚣
.
Contours become
softer.
Note
z
If you press
󱚤
while the adjustment value is [15],
the value will become [0]. If you press
󱚣
while the
adjustment value is [0], the value will become [15].
70


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Panasonic PT-DS20KU at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Panasonic PT-DS20KU in the language / languages: English as an attachment in your email.

The manual is 18,56 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Panasonic PT-DS20KU

Panasonic PT-DS20KU User Manual - German - 190 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info