511535
143
Zoom out
Zoom in
Previous page
1/179
Next page
Lamp/Temperature/Filter Indicators
ENGLISH - 143
Maintenance
Temperature indicator<TEMP>
Indicator
status
Lighting in red
Flashing in red
(2 times)
Flashing in red
(3 times)
Status Warm-up status
Internal
temperature
is high.
(WARNING)
Internal temperature is high
(standby mode)
The cooling fan has
stopped.
Cause
z
Did you turn on the
power when the
room temperature
was about 0°C
(32°F)?
z
Is the air intake/exhaust port blocked?
z
Is the room temperature high?
z
Is the lter indicator <FILTER> not lit?
Solution
z
Wait at least ve
minutes in the
current status.
z
Install the unit
in a location
with an ambient
temperature of
0°C (32°F) to 45°C
(113°F)
*1
.
z
Remove any objects that are blocking the air
intake/exhaust port.
z
Move the projector to a location with an
ambient temperature of 0°C (32°F) to 45°C
(113°F)
*1
and a humidity of 20% to 80% (no
condensation).
z
Clean the air filter unit or replace it. (
page 144)
z
Turn the <MAIN
POWER> switch to
<OFF> (
page 51),
and consult your
dealer.
*1: When using the projector at high elevations (1 400 m (4 593 ft) – 2 700 m (8 858 ft) above sea level), the operating environment
temperature will be 5°C (41°F) lower than the maximum limit.
When using a smoke cut lter, the temperature will be 0°C (32°F) to 35°C (95°F). However, it cannot be used at high elevations.
Note
z
If the temperature indicator <TEMP> is still lit or ashing after taking the preceding measures, ask your dealer
to repair the unit.
Filter indicator <FILTER>
Indicator
status
Lighting in red Flashing in red
Status
The lter is clogged.
The temperature inside or outside the projector is abnormally high.
The air lter unit is not
attached.
Cause
z
Is the air lter unit
dirty?
z
Is the air intake/
exhaust port
blocked?
z
Is [HIGH ALTITUDE
MODE] set
correctly?
z
Is the air lter unit
attached?
Solution
z
Clean the air lter
unit or replace it.
(
page 144)
z
Remove any objects
that are blocking the
air intake/exhaust
port.
z
When using the
projector at high
elevations 1 400 m
(4 593 ft) – 2 700 m
(8 858 ft) sea
level, set [HIGH
ALTITUDE MODE]
(
page 100) to [ON].
z
Do not use the
projector at high
elevations 2 700 m
(8 858 ft) or higher
above sea level.
z
Attach the air lter
unit.
Note
z
If the lter indicator <FILTER> is still lit or ashing after taking the preceding measures, ask your dealer to
repair the unit.
z
If the lter is clogged, only one lamp may light even when [LAMP SELECT] is set to [QUAD], [TRIPLE], or
[DUAL]. Cleaning the air lter unit or replacing it with a new one will turn off the indicator.
143


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Panasonic PT-DS20KE at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Panasonic PT-DS20KE in the language / languages: English as an attachment in your email.

The manual is 17,72 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Panasonic PT-DS20KE

Panasonic PT-DS20KE User Manual - German - 190 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info