502445
31
Zoom out
Zoom in
Previous page
1/42
Next page
Replacement
ENGLISH - 31
Maintenance
Replacement procedure
Removing and replacing the lamp unit
1. Use a Phillips-head screwdriver to loosen the
“lamp unit cover fixing screw” (1 screw) on the
back of the projector until the screws turn freely,
and remove the lamp unit cover.
Slide the lamp unit cover to the control buttons and
pull to remove.
2. Use a Phillips-head screwdriver to remove the
“lamp unit fixing screws” (3 screws).
3. Hold the handles of the lamp unit and pull the used
lamp unit gently from the projector.
4. Hold the handle of the new lamp unit and replace it
in correct direction.
5. Press in the lamp unit until it clicks and make sure
the unit is installed securely.
6. Tighten the “lamp unit fixing screws” (3 screws)
securely with a Phillips-head screwdriver.
7. Attach the lamp unit cover and tighten the “lamp
unit cover fixing screw” (1 screw) securely with a
Phillips-head screwdriver.
Slide the lamp unit cover to the hinge side along the
guide and push in to attach securely.
Make sure the fan electric power connector of the
lamp unit cover is inserted securely to the projector’s
connector.
Lamp unit cover
fixing screw
Lamp unit cover
Handle
Handle Lamp unit fixing screws
Lamp unit fixing screws
NOTE:
The lamp unit and the lamp unit cover must be attached correctly and securely. Failure to do so, the projector will bot be turned on for the
protection circuit.
When the lamp unit is replaced, the duration of usage time will be reset to "0".
31


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Panasonic PT-D6000E at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Panasonic PT-D6000E in the language / languages: English as an attachment in your email.

The manual is 3,61 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Panasonic PT-D6000E

Panasonic PT-D6000E User Manual - German - 42 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info