511555
46
Zoom out
Zoom in
Previous page
1/52
Next page
Appendix
Technical Information
ENGLISH - 46
J Basic format
J Cable specifications
(When connected to a computer)
J Control commands
* Not available for PT-D5000.
NOTE:
No command can be sent or received for 10 to 60 seconds after the lamp starts lighting. Try sending any command after
that period has elapsed.
When transmitting multiple commands, be sure to wait until 0.5 seconds has elapsed after receiving the response from
the projector before sending the next command. When sending commands without parameters, a colon (:) is not
necessary.
When the wrong command is sent, the “ER401” or “ER402” status is sent from the projector to the personal computer.
Projector ID supported on the RS-232C interface is ZZ (ALL) and a group of 01 to 64 and 0A to 0Z.
The “STX” character code is 02 and the “ETX” character code is 03.
If a command is sent with a projector ID specified, the projector will return answer back only in the following cases:
If it coincides with the projector ID
If the ID specification is ALL and responding (ID ALL) is on
If the ID specification is Group and responding (ID Group) is on
Command Control contents Parameter/Remarks
PON
Power ON
In standby mode, all commands other than the PON command are ignored.
The PON command is ignored during lamp ON control.
POF
Power OFF
QPW
Power query
000 = Standby 001 = Power ON
IIS
Switch input modes
VID = VIDEO
RG1 = RGB1
DVI = DVI
SVD = S-VIDEO
RG2 = RGB2
SDI = SDI (PT-DZ6710 only)
QSL
Query for active lamp
mode
0 = DUAL
2 = Only LAMP 1 is on
1 = SINGLE
3 = Only LAMP 2 is on
SINGLE will use the lamp (LAMP 1 or LAMP 2) with shorter operating hours.
LPM
Active lamp mode
0 = DUAL
2 = Only LAMP 1 is on
1 = SINGLE
3 = Only LAMP 2 is on
OLP *
Lamp power setting
0 = HIGH 1 = LOW
STX A D I 1 I 2 ; C1 C2 C3 : P1 P2 - Pn ETX
Start
(1 byte)
ZZ, 01 to 64 and 0A to 0Z
ID designate
(2 bytes)
2 ID characters
(2 bytes)
Semicolon
(1byte)
3 command characters
(3 bytes)
Colon
(1byte)
Parameter
(undefined length)
End
(1 byte)
NC
NC
NC
NC
NC
NC
NC
NC
Projector Computer
(DTE)
46


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Panasonic PT-D6000 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Panasonic PT-D6000 in the language / languages: English as an attachment in your email.

The manual is 3,52 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Panasonic PT-D6000

Panasonic PT-D6000 User Manual - German - 52 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info