511555
16
Zoom out
Zoom in
Previous page
1/52
Next page
ENGLISH - 16
Settings
PICTURE menu
Depending on the projection environment, you can use these
preset parameter settings to optimise image projection. Press
I H to cycle through the options.
You can adjust the contrast of the projected image. Adjust the
BRIGHTNESS in advance if necessary.
Call up the bar scale by pressing I, H or the ENTER button,
and press I H to adjust the value.
You can adjust the brightness of the projected image. Call up
the bar scale by pressing I, H or the ENTER button, and
press I H to adjust the value.
You can adjust the colour saturation of the projected image.
Call up the bar scale by pressing I, H or the ENTER button,
and press I H to adjust the value.
You can adjust the skin tone in the projected image. Call up the
bar scale by pressing I, H or the ENTER button, and press
I H to adjust the value.
You can adjust the white balance of the projected image.
Select the required option and press I, H or the ENTER
button to call up the bar scale.
Q Adjusting more detailed white balance
You can adjust white balance of RGB individually in high
and low level.
1. Select USER and press the ENTER button.
2. Select WHITE BALANCE HIGH or WHITE BALANCE
LOW, and call up the scale bars by pressing I, H or
the ENTER button.
3. Press I H to adjust the value of each colour.
Setting range
WHITE BALANCE HIGH: 0 to 255 (Default: 255)
WHITE BALANCE LOW: 0 to 63 (Default: 32)
PICTURE MODE
STANDARD Setting for a general image
CINEMA Setting for a cinema type movie
NATURAL
Reproduces the original colour of the
image
DYNAMIC Bright and sharp setting
GRAPHIC Setting for image from computers
NOTE:
Factory default is STANDARD for moving images and
GRAPHIC for RGB system.
CONTRAST
I Lower
H Higher
Setting range: -31 to +31
BRIGHTNESS
I Darker
H Brighter
Setting range: -31 to +31
Remote control
See “Navigating through the menu” on page 15.
See “Main menu and Sub-menu” on page 12.
COLOR
I Lighter
H Darker
Setting range: -31 to +31
TINT
I More reddish
H More greenish
Setting range: -31 to +31
COLOR TEMPERATURE
DEFAULT Balanced white
USER More detailed adjustment
MIDDLE More reddish
HIGH More bluish
NOTE:
With excessive unbalanced adjustment, such as extremely
high with extremely low setting, all the colours may be
displayed abnormally. Press the DEFAULT button to reset the
selected item to the default setting.
•Adjust COLOR TEMPERATURE with signal image. Internal
test pattern is not for COLOR TEMPERATURE adjustment.
16


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Panasonic PT-D6000 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Panasonic PT-D6000 in the language / languages: English as an attachment in your email.

The manual is 3,52 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Panasonic PT-D6000

Panasonic PT-D6000 User Manual - German - 52 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info