511573
59
Zoom out
Zoom in
Previous page
1/74
Next page
Maintenance/replacement
ENGLISH -
59
Maintenance
Replacing the Lamp unit
J
Attention
When the projector is mounted on a ceiling, do not work with your face close to the projector.
z
Attach the lamp unit and the lamp cover securely.
z
When you experience difculty in installing the lamp, remove it and try again. If you use force to install the lamp, the
z
connector may be damaged.
Turn off the Power by following the procedure in "Powering off the projector". 1 )
(
Æ
page 30). Unplug the AC power cord. Wait at least 1 hour and make sure the lamp
unit and surroundings are cool.
Use a Phillips screwdriver to loosen the two lamp cover screws and open the lamp 2 )
cover with holding the lamp cover screws.
Use a Phillips screwdriver to loosen the two lamp unit screws until the screws turn 3 )
freely. Hold the used lamp unit by its base, and pull it gently from the projector.
Insert the new lamp unit in correct direction. Tighten the two lamp unit screws 4 )
securely with a Phillips screwdriver.
Close the lamp cover, and tighten the two Lamp cover screws securely with a Phillips 5 )
screwdriver.
When installing the lamp cover, make sure the lamp cover falling-prevention rubber not be clamped.
z
J
Reset the Lamp Hours Used
After replacing the lamp unit, make sure to reset the usage time in the [Clear Lamp Hours] menu. (
Æ
page 44)
Lamp cover
screws
Lamp unit screws
Base
Lamp cover fall-
prevention rubber
59


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Panasonic PT-CW240E at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Panasonic PT-CW240E in the language / languages: English as an attachment in your email.

The manual is 7,93 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info