542439
54
Zoom out
Zoom in
Previous page
1/81
Next page
Setting
54
- ENGLISH
Settings
3D setting
This function is used to set the 3D display function.
Press ▲▼ to select these functions as
follows:
3D
J
Select among [Off], [On] and [NVIDIA 3D VISION]
mode.
* When selecting [NVIDIA 3D VISION] mode, the
other menus [3D sync], [3D->2D], [3D phase]
setting are not necessary. (displayed in gray)
3D sync
J
If you see a discrete or overlapping image, 3D
Sync Invert function* enables you to get the
correct image. Switch the 3D sync signal to
1
or
2
.
3D->2D
J
When viewing the 3D contents without wearing
the 3D glasses, set to "On" to convert 3D display
format to 2D display format.
3D phase
J
Adjust the phase of the 3D sync signal when the
3D SYNC OUT terminal is used. (0 - 31)
Note
The Frame Sequential Format is a technology that
z
rapidly alternates between left-eye and right-eye
images. When right-eye image and left-eye image
are switched or you feel like you cannot get 3D
effect due to out-of- synchronization state, first try
to synchronize the projector with the 3D glasses by
using 3D SYNC function.
Zoom
This function is used to memorize the Zoom
adjustment with the <ZOOM +/-> buttons on the
control panel.
Press ▲▼ to switch
between each option
as below.
Reset
Reset the Zoom adjustment when the
projector is turned off or the AC power
cord is unplugged.
Store1
Store the Zoom setting even when the
projector is turned off. Zoom setting
is cleared when the AC power cord is
unplugged.
Store2
Store the Zoom setting even when the
AC power cord is unplugged.
Background
Select the background screen for when no input signal
is detected.
Press ▲▼ to select [Background].1 )
Press the <SELECT> button.2 )
Press ▲▼ to switch3 )
between each
option as below.
Blue
Blue colored background.
Black
Black colored background.
Display
This function decides whether to display O n-Screen
Displays.
Press ▲▼ to select [Display].1 )
Press the <SELECT> button.2 )
Press ▲▼ to switch3 )
between each
option as below.
On
Show all the On-Screen
displays *
1
Countdown
off
Show the input image instead
of the countdown when turning
on the projector *
2
Off
Hide the On-Screen Displays *
3
Use this function when you want to project *1 :
images after the lamp becomes bright enough.
The factory default setting is in this option.
Use this function when you want to project the *2 :
image as early as possible even when the lamp
is not bright enough.
Hide the On-Screen Displays except; *3 :
● On-Screen Menu.
● [Power off?]
● [P-timer] display.
● No signal for [Power management]
● [Please wait ...]
Arrows for the True function in the Screen
Menu.
54


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Panasonic PT-CW230EA at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Panasonic PT-CW230EA in the language / languages: English as an attachment in your email.

The manual is 7,09 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info