542439
32
Zoom out
Zoom in
Previous page
1/81
Next page
Projecting
32
- ENGLISH
Basic Operation
For Viewing 3D Contents
To view 3D images, you need to prepare at least the 3D active shutter glasses, 3D content and 3D reproducing
equipment. For example, as for computer, when transmitting 3D signals from a computer to the projector, you
also need to install the graphic card which has the capability to sequentially output the 3D frames at 120Hz and
software in the computer. The 3D signal type which the projector can accept is frame sequential only. Other 3D
signal types such as frame packing and side-by-side are not supported.
As for 3D glasses, DLP Link format and IR emitter format are compatible with this projector. Compatibility with
any other 3D glasses than the 2 types 3D glasses is not guaranteed.
In a situation of using NVIDIA 3D glasses, NVIDIA IR emitter, and a computer which NVIDIA graphics card is
installed, when you want to view NVIDIA-compatible 3D contents, please set to NVIDIA 3D VISION mode.
Attention
COMPUTER 2 IN/MONITOR OUT terminal is not supported NVIDIA 3D VISION. Please input the image signals to
z
COMPUTER 1 IN/COMPONENT IN or HDMI terminal.
Using 3D Glasses with DLP Link compatible
J
When using DLP Link compatible glasses, follow these steps:
Turn on the projector and the 3D glasses.1 )
Wear the 3D glasses and press the 3D button on the remote control to activate 3D Display function. 2 )
When 3D mode is in On, 3D indicator turns blue.
If you see a discrete or overlapping image, 3D Sync Invert function enables you to get the correct image. 3 )
Press the 3D button to switch 3D Sync signal from among "3D Off", "3D (Sync 1)", "3D (Sync 2)" or "3D
VISION".
Note
3D setting can also be selected from the menu.
z
(
Æ
page 54)
Using 3D Glasses with IR wireless emitter
J
When using IR emitter system, follow these steps:
Turn off the projector.1 )
Connect the sync cable for the IR emitter to 3D SYNC OUT terminal of the projector.2 )
Turn on the projector, the IR emitter and the stereoscopic wireless LCD glasses.3 )
Wear the 3D glasses and press the 3D button on the remote control to activate 3D Display function.4 )
Note
If you see a discrete or overlapping image, press the 3D button to switch 3D Sync signal from among "3D Off", "3D (Sync 1)",
z
"3D (Sync 2)" or "3D VISION".
You can also invert the sync signal by using the switch on the IR emitter.
z
Attention
Before viewing 3D contents, please read "Precaution for use". (
z
Æ
pages 14-15)
32


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Panasonic PT-CW230EA at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Panasonic PT-CW230EA in the language / languages: English as an attachment in your email.

The manual is 7,09 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info