543649
47
Zoom out
Zoom in
Previous page
1/54
Next page
Technical Information
ENGLISH - 47
Appendix
J Communication settings
J Control commands
J Inquiry commands
Signal level RS-232C Character length 8 bits
Sync. method Asynchronous Stop bit 1 bit
Baud rate 9 600 bps X parameter None
Parity None S parameter None
Command Control contents Remarks
PON
POWER ON
In standby mode, all commands other than the PON command are ignored.
The PON command is ignored during lamp ON control.
POF
POWER OFF
If a PON command is received while the cooling fan is operating after the lamp has switched
off, the lamp is not turned back on again straight away in order to protect the lamp.
IIS
INPUT
Parameter:
YUV = COMPONENT IN (YP
BPR)
SVD = S-VIDEO IN
HD1 = HDMI1 IN
VID = VIDEO IN
HD2 = HDMI2 IN
RG1 = COMPUTER IN
OMN
MAIN Displaying the main menu.
OEN
ENTER Activating the selected items in the menu mode.
OBK
RETURN Returning to the previous menu or escaping from the menu mode.
OCU/OCD/
OCL/OCR
Navigation buttons
OCU = F button
OCD = G button
OCL = I button
OCR = H button
OST
DEFAULT Resetting to the factory default setting. (page 23)
OFZ
FREEZE
Freezing the projected screen.
Parameter:
0 = OFF 1 = ON
OOT
SLEEP
Setting the duration of time to turn off the power automatically. (page 39)
0 = OFF 1 = 60min. 2 = 90min. 3 = 120min. 4 = 150min.
5 = 180min. 6 = 210min. 7 = 240min.
OSH
BLANK
Turning off the projection temporarily.
Send the command to switch between ON and OFF.
Do not send the command consecutively.
OVM
PICTURE Activating the PICTURE menu. Send the command to switch menu items. (page 23)
VS1
ASPECT Switching the aspect ratio. (page 23)
VPM
PICTURE MODE
Switching the PICTURE MODE. (page 30)
Parameter:
NOR = NORMAL DYN = DYNAMIC VCN = VIVID CINEMA
CN1 = CINEMA1 CN2 = CINEMA2 NAT = NATURAL GAM = GAME
Command Control contents Parameter
QPW
Power status 000 = OFF 001 = ON
QFZ
FREEZE status 0 = OFF 1 = ON
QIN
INPUT signal status
YUV = COMPONENT IN (YP
BPR)
SVD = S-VIDEO IN
HD1 = HDMI1 IN
VID = VIDEO IN
HD2 = HDMI2 IN
RG1 = COMPUTER IN
QOT
SLEEP status
0 = OFF 1 = 60min. 2 = 90min. 3 = 120min. 4 = 150min.
5 = 180min. 6 = 210min. 7 = 240min.
QPM
PICTURE MODE status
NOR = NORMAL DYN = DYNAMIC VCN = VIVID CINEMA
CN1 = CINEMA1 CN2 = CINEMA2 NAT = NATURAL GAM = GAME
QSH
BLANK status 0 = OFF
47


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Panasonic PT-AX200U at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Panasonic PT-AX200U in the language / languages: English as an attachment in your email.

The manual is 3,34 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info