511492
42
Zoom out
Zoom in
Previous page
1/75
Next page
1. Adjustment item and a procedure
1. 1. Flicker Adjustment
1. 1. 1.Adjustment Procedure
1. Select "FLICKER ADJUST" on "EXT OPTION" menu and press "ENTER" button on the main unit or remote control unit.
2. "DESK setting (blue)" is displayed when entering the adjustment mode.
3. Setting value is increased and decreased with the right-arrow " " and left-arrow " " buttons.
- Adjust the setting value to minimize the flicker on the screen.
4. The pattern (adjustment display) is switched with the up-arrow " " and down-arrow " " buttons.
5. Press "MENU" button on the main unit or remote control unit.
1. 2. Data Transfer
1. 2. 1. Required equipments
1. PC : Use to transfer the backup data.
2. Communication cable : D-sub 9pin (male/emale RS-232C straight)
3. Software : Service ORCA11.exeAdjustment software is downloaded from the projector service homepage.
1. 2. 2. Preparation
1. 2. 3. Backup the Data (It is before A-P.C.Board exchange)
1. Switch the projector to "Standby" mode (POWER indicator is Lighting in red).
2. Start up service software Service ORCA11.exe with a computer.
3. Select language and click the [ OK ] button.
4. 1) Select the Serial Port of the computer.
2) Select a model number.
(Case of AT6000, select the AE8000.)
3) Click the [ Data ] button.
When the following components in this projector are replaced, adjustments are required. Adjust each item according
to the table below.
A-P.C.Board / M3-P.C.board
Replaced parts
A-P.C.Board
After the "1.2.Data Transfer" has been
completed, please adjust it.
OPTICAL BLOCK / A-P.C.Board
Adjustment Items
1. 3. Model Information Setup
1. 5. Clog Sensor Calibration
1. 1. Flicker Adjustment
1. 4. Serial Number Setup
1. 2. Data Transfer
A-P.C.Board
Remarks
- There are 6 patterns of "DESK setting (blue)", "DESK setting (red)", "DESK setting (green)", "CEILING setting (blue)",
"CEILING setting (red)" and "CEILING setting (green)".
- When "MENU" button is pressed, the setting value at that time is saved into this projector and the adjustment
mode is canceled.
1. Connect the RS-232C termanal of projector
and PC with a RS-232C cable.
Save data to a PC before A-P.C.B exchange and
write it into a new A-P.C.B.
A-P.C.Board
Compute
r
Projecto
r
RS-232C cable (Streight)
ADJ - 2
42


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Panasonic PT-AT6000E at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Panasonic PT-AT6000E in the language / languages: English as an attachment in your email.

The manual is 38,45 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Panasonic PT-AT6000E

Panasonic PT-AT6000E User Manual - German - 110 pages

Panasonic PT-AT6000E User Manual - Spanish - 110 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info