511584
88
Zoom out
Zoom in
Previous page
1/94
Next page
Technical information
88 -
ENGLISH
Appendix
Cable specications
(When connected to a personal computer)
Control commands
Commands available when controlling this projector from a computer are as follows.
<Operation commands>
Command
Control contents Remarks
PON POWER ON In standby mode, all commands other than the PON command are ignored.
The PON command is ignored during lamp on control.
If a PON command is received while the cooling fan is operating after the lamp has
z
switched off, the lamp is not turned back on unless approximately 85 seconds have
passed in order to protect the lamp.
POF POWER OFF
IIS
SWITCH
INPUT
Parameters
CP1 = COMPONENT IN SVD = S-VIDEO IN
VID = VIDEO IN HD1 = HDMI 1 IN HD2 = HDMI 2 IN
RG1 = COMPUTER IN
OMN MENU Displays the main menu.
OEN ENTER Activates the selected items in the menu mode.
OBK RETURN Returns to the previous menu or escaping from the menu mode.
OCU
OCD
OCL
OCR
Navigation buttons
(▲▼◄►)
OCU = ▲ cursor OCD = ▼ cursor
OCL = ◄ cursor OCR = ► cursor
OST DEFAULT Resets to the factory default setting. (
page 32)
OFZ FREEZE
Freezes the projected screen. (
page
70)
0 = OFF, 1 = ON
FC1 FUNCTION BUTTON Activates the function allocated to the <FUNCTION> button of the remote control.
OSH BLANK
Turns off the projection temporarily.
Sends the command to switch between ON and OFF. (
page
70)
Do not rapidly switch between ON/OFF.
While the BLANK function is ON, it is switched OFF when any command is received.
OVM PICTURE
Activates the [PICTURE] menu. Send the command to switch menu items.
(
page
37)
OWM WAVEFORM
Parameter
0 = OFF 1 = FULL SCAN(Y) 2 = FULL SCAN(R) 3 = FULL SCAN(G)
4 = FULL SCAN(B) 5 = SINGLE LINE SCAN(Y) 6 = SINGLE LINE SCAN(R)
7 = SINGLE LINE SCAN(G) 8 = SINGLE LINE SCAN(B)
VS1 ASPECT
Switches the aspect ratio. Aspect ratio is switched each time this command is sent.
(
page
56)
VPM PICTURE MODE
Switches the [PICTURE MODE]. (
page
37)
Parameter
NOR = NORMAL DYN = DYNAMIC GM1 = GAME SP = SPORTS
709 = REC709 CN1 = CINEMA1 VCN = VIVID CINEMA
OOT SLEEP
Sets the duration of time after which the power is to be turned off automatically. (
page
68)
0 = OFF 1 = 60MIN. 2 = 90MIN. 3 = 120MIN. 4 = 150MIN.
5 = 180MIN. 6 = 210MIN. 7 = 240MIN.
OEC ECO MANAGEMENT Displays the [ECO MANAGEMENT] menu.
1
2
3
4
5
6
7
8
9
NC
NC
NC
NC
NC
NC
NC
NC
1
2
3
4
5
6
7
8
9
Projector PC (DTE)
88


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Panasonic PT-AH1000E at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Panasonic PT-AH1000E in the language / languages: English as an attachment in your email.

The manual is 15,34 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info