511584
69
Zoom out
Zoom in
Previous page
1/94
Next page
[OPTION] menu
ENGLISH
- 69
Settings
[
POWER ON LINK]
Specify whether or not to switch the power of the projector
on when it is in standby by operating external devices.
Switch settings Switch settings
[OFF] Inactive
[ON]
Switch projector power on along
with external devices
Note
Depending on the external device, the projector may
z
automatically turn on when some functions of the
connected devices are used. (Only in standby)
Due to the projector’s characteristics, it takes time
z
before projection begins. Please be aware that video
may already have started by the time the projector is
operating fully.
[
POWER OFF LINK]
Specify whether to switch the power off for external devices
when this projector is set to standby.
Switch settings Switch settings
[ON]
Switch the power of external
devices off along with this
projector
[OFF]
Do not switch the power of
external devices off along with
this projector
Note
This function works even if the projector enters standby
z
mode automatically through the [SLEEP] function.
There are cases where some external devices may
z
not be switched off depending on their status (currently
recording etc.)
[
STANDBY POWER SAVE]
Specify whether or not to switch the mode of external
devices to the mode with minimum power consumption
when the projector is set to standby.
Switch settings Switch settings
[OFF] Do not switch
[ON]
Switch the mode of external
devices to the mode with
minimum power consumption
Note
This function works when [POWER OFF LINK] is set to
z
[ON].
Depending on the external devices, when the projector
z
is turned on power consumption may increase even in
[STANDBY POWER SAVE] mode in order to achieve
faster start up.
[
INTELLIGENT AUTO STANDBY]
Specify whether or not to keep the power on for external
devices selected for input and switch the power off for
external devices not selected for input.
If you select [ON (WITH REMINDER)], a message is
displayed before the function operates.
Switch settings Switch settings
[OFF]
Maintain the power on state of
devices for which input is not
selected
[ON (WITH
REMINDER)]
After a conrmation message is
displayed, devices for which the
input is not selected are set to
standby mode
[ON (NO
REMINDER)]
Devices for which the input is not
selected are set to standby mode
Note
This function may not work properly depending on the
z
external device.
69


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Panasonic PT-AH1000E at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Panasonic PT-AH1000E in the language / languages: English as an attachment in your email.

The manual is 15,34 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info