511491
19
Zoom out
Zoom in
Previous page
1/75
Next page
5. 3. 2. Replacement procedure for lamp unit
1. Confirm that the lamp unit is cooled down completely. (More than 1 hour has passed after main power is off.)
2. Open the top cover in the direction of the arrow.
3. Lamp cover fixing screw is loosened all the way and remove "Lamp cover".
4. Use a Phillips screwdriver to unscrew the lamp unit fixing screws (2 screws) until loose.
5. Hold the handle of the lamp unit and with the lamp unit lock held in the direction of the red arrow,
carefully pull it out of the projector unit in a vertical motion.
6. Insert the new lamp unit in correct direction. Tighten the two lamp unit fixing screws securely with a Phillips screwdriver.
* Press down on the A part firmly when inserting the lamp unit.
7. Attach the lamp cover, and tighten the two lamp cover fixing screws securely with Phillips screwdriver.
8. Close the top cover of the projector.
5. 3. 3. Reset procedure of the lamp use time
1. Insert the power plug into a power outlet, and press the <ON> side of the <MAIN POWER> switch to turn on the power.
2. Press the <MENU> button to display the menu screen, and select [OPTION] with the ▲▼ buttons.
3. Press the <ENTER> button, and select [LAMP RUNTIME] with the ▲▼ buttons.
4. Hold the <ENTER> button down for 3 seconds.
5. Select [OK] with the t u buttons and then press the <ENTER> button.
* LAMP RUNTIME is reset to “0” and the projector prepares to power off.
After a short while, the projector enters power off (standby) mode.
lamp cover
Lamp cover
fixing screws
Top cover
Lamp unit fixing screws
Lamp unit lock
Handle
A
INF - 13
19


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Panasonic PT-AE8000U at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Panasonic PT-AE8000U in the language / languages: English as an attachment in your email.

The manual is 38,45 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info