511494
49
Zoom out
Zoom in
Previous page
1/75
Next page
Notes
1. Resistor
All the resistors are carbon 1/4W resistors, unless marked as follows.
The unit of resistance is an OHM [Ω] (K=1 000 M=1 000000).
: Nonflammable : Metal Oxide
: Solid : Metal Film
: Wire Wound : Fuse
2. Capacitor
: Temperature Compensation : Electrolytic
: Polyester : Bipolar
: Metalized Polyester : Dipped Tantalum
1. BLOCK DIAGRAM  ・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・
DIA-2
: Polypropylene : Z-Type
1.1. Power Supply
3. Coil
1.2. Signal Processing
The unit of inductance is a H, unless otherwise noted.
4. Test Point
2. INTERCONNECTION BLOCK DIAGRAM  ・・・・・・・・・・・・・・
DIA-4
: Test Point
5. HOT and COLD indications
3. SCHEMATIC DIAGRAM ・・・・・・・・・・・・・・・・・・・・・・・・・・・・・
DIA-5
3.1. A -P.C.Board
3.2. S / V / L -P.C.Board
6. This schematic diagram is the latest at the time of printing and the subject to change without notice.
4. CIRCUIT BOARDS DIAGRAM  ・・・・・・・・・・・・・・・・・・・・・・・・
DIA-9
Precautions
4.1. A -P.C.Board
1. NEVER touch the HOT part or the HOT and COLD parts at the same time, or you may get an electric shock.
4.2. S / V / L -P.C.Board
2. NEVER short-circuit the HOT and COLD circuits, or the fuse may blow and the parts may break.
4. MAKE SURE to unplug the power cord from the power outlet before removing the chassis.
5. When ordering parts, please check the part number of the "Replacement Parts List".
3. NEVER connect an instrument such oscilloscope to the HOT and COLD circuit simultaneously, or the fuse may blow.
Connect the ground of instruments to the ground of the circuit being measured.
CONTENTS
Model No.
PT-AE8000U
PT-AT6000E
PT-AE8000EA / AE8000EH / AE8000EZ
SECTION 4
< Schematic Diagram >
Components identified by the intemational symbol have special characteristics important for safety.
When replacing any of these components, use only the manufacturer's specified ones.
The power circuit board contains a circuit area using a separate power supply to isolate the ground connection.
The circuit is defined by HOT and COLD indications in the schematic diagram. Take the precautions below:
Important Safety Notice
49


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Panasonic PT-AE8000EH at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Panasonic PT-AE8000EH in the language / languages: English as an attachment in your email.

The manual is 38,45 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info