511494
17
Zoom out
Zoom in
Previous page
1/75
Next page
5. Notification for service operation
5. 1. Before service operation
5. 1. 1. LCD panel
5. 1. 2. Lamp unit
* Lamp unit as an optional accessories, distribution through commercial channel.
* Do not use any other lamp unit than indicated above.
2. Philips driver is required for replacing the lamp.
3. When replacing the lamp, make sure to grasp the handle portion of the lamp unit.
5. When throwing the lamp away, consult local municipalities about the way to do.
[Attention]
*
5. 1. 3. Air filter unit
* Clean the Air filter after every 100 hours of usage.
* A replacement air filter kit (TXFKN01RYNZP) is provided with a replacement lamp unit, ET-LAA410.
1. If the air filter is excessively dirty, the internal temperature of the projector increases and may cause malfunction.
2. Do not use the projector without attaching the air filter.
3. The air filter should be replaced when cleaning is ineffective and when replacing the lamp unit.
5. 1. 4. Repair operation
1. When electrifying the projector for the check and adjustment with top case taken off, the strong light emits from
the lighting cover and its around.
Wear the anti -ultraviolet rays glasses and shade.
2. While the fan is working, do not pull the plug out nor disconnect the breaker.
* When the monitor of power supply lamp turns red and the fan stops, disconnecting can be done.
3. Repair should be done with the power supply off.
* When replacing the print board, the internal electrical parts can be broken by the static electricity of clothes or
human body. Be careful of static electricity and wear the anti-static electricity globes.
4. After finishing the repair, check whether it works properly or not.
5. Check the image with 10 steps or gray scales that can show the gradation and perform self-check.
1. Be careful for handling the lamp because it is made of glass and might be
exploded by hitting hard object or fall in down.
4. The lamp might be exploded. Be careful for the case that the blown glasses are scattered around.
The replacement operation should be done with the highest care.
When the projector is set on the ceiling, make sure not to work just under the lamp unit or not to be closer to the lamp.
Please read carefully the page 'CAUTIONS FOR THE SAFETY', 'BEFORE USING', 'CHECK AND REPLACEMENT OF
PARTS' on the instruction book to know about lamp unit, how to use lamp and how to replace the lamp unit.
1. The display unit of this projector comprises three LCD panels. Although an LCD panel is a product of high precision
technology, some of the pixels on the projected image may be missing or constantly lit.
Please note that this is not a malfunction.
2. Displaying a still image for a longer time may result in an after-image on the LCD panels.
If this ha
pp
ens
,
dis
p
la
y
the all white screen in the test
p
attern for an hour or more.
Replacement lamp unit : ET-LAA410
Air Filter Kit
(TXFKN01RYNZP)
INF - 11
17


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Panasonic PT-AE8000EH at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Panasonic PT-AE8000EH in the language / languages: English as an attachment in your email.

The manual is 38,45 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info