511494
12
Zoom out
Zoom in
Previous page
1/75
Next page
3. Extend mode (EXT OPTION menu)
This projector has extend mode "EXT OPTION" menu in addition to standard on-screen menus.
This mode has Self-Check function, Test Pattern and other functions for Service.
 3. 1. Procedure to o
p
en / close "EXT OPTION" menu.
1. When the projector is power ON, press "POWER" button on the main unit or remote control unit to display
"POWER OFF" confirmation screen.
2. Press the " " button to select "CANCEL" in the "POWER OFF" confirmation screen.
3. On the main unit or remote control unit, press the buttons in order of " ", " ", " ", " " and "ENTER".
4. When "MENU" button is pressed at the "EXT OPTION" mode, Extend-mode is closed.
 3. 2. EXT OPTION Menu and Functions
1.FAN FULLMODE
Setting the cooling fan motor rotation speed.
2.AUTO SETUP
Setting AUTO SETUP mode.
- NORMAL: Dot clock is adjusted strictly.
- SPECIAL: Dot clock is adjusted roughly.
* Do not usually change initial setting (NORMAL).
3.SELF CHECK
The content of self checking are displayed.
(1) -
Software Version (MM : Main microprocessor, F:FPGA )
* FPGA (Field Programmable Gate Array)
(2) -
Input signal Display
( [NO-SYNC] is displayed when there is no input signal).
(3) -
Input Horizontal/Vertical signal frequency
(For the RGB/YPBPR Input only)
(4) -
The temperature abnormality check
("NG" is displayed for any abnormality)
(5) -
Temperature around the air intake port/exhaust port and
Filter sensor  (deg C/A/D conversion value)
(6) -
Filter sensor Difference Correction (A/D conversion) Value
(7) -
Rotation check of Intake fan / Lamp fan / Iris fan
(Displays "NG" when Fan is abnormal condition)
(8) -
Iris condition check (Abnormal condition = "NG")
(9) -
Lamp condition check (Abnormal condition = "NG")
(10) -
Lamp cover installation check (Abnormal condition="NG")
(11) -
Displays the projector cumulative usage time
(12) -
Cumulative usage time (actual time) and Number of
LAMP ON times
"Current number : Last reset : Reset of last but one"
(13)-
Displays the serial number of the projector.
(14)-
Software Version (SM : Sub microprocessor, IM : IRIS control microcomputer)
(15)-
Gamma, Color Unevenness and Crosstalk correction data check (Whether data are stored in the flash ROM)
(16)-
Thermo sensor (Intake Air / Exhaust Air / Filter Air) measurement value when thermal shutdown
(deg C/A/D conversion value)
Switching ON "FAN FULLMODE", the rotation level of the
fan becomes high-speed rotation (fixed). Moreover, when
"FAN FULLMODE" is ON, changing "HIGH ALTITUDE
MODE" in OPTION menu becomes impossible (setting
FAN FULLMODE is given priority more than HIGH
ALTITUDE MODE).
SELF CHECK S/N SD12345678
MM:1.00 SM:1.00
F:1.00 IM:1.00
XGA60 G-SAVED OK
H 48.48KHZ U-SAVED OK
V 60.60HZ C-SAVED OK
----------- TEMP ------------
TEMP OK
INTK 22.7/157 INTK ---.-/---
EXST 26.6/148 EXST ---.-/---
FLTR 88.7/094 FLTR ---.-/---
FLTR SENSOR OFFSET 79
----------- FAN -------------
INTK OK EXST OK
LAMP OK PWR OK
IRIS OK
-------- MECHANICAL ---------
IRIS OK LENS MEM OK
----------- LAMP ------------
LAMP OK 4000H OK
COVER OK
------- UNIT HISTORY --------
TOTAL 11H RESET 0
12H10 52 12H10
0H00 0 0H00
0H00 0 0H00
EXT OPTION
FAN FULL MODE OFF
AUTO SETUP NORMAL
SELF CHECK
STATUS
FLICKER ADJUST
1.
2.
3.
4.
5.
(1)
(2)
(3)
(4)
(5)
(6)
(8)
(7)
(9)
(11)
(10)
(12)
(13)
(14)
(15)
(16)
(17)
(19)
(18)
(20)
(21)
"OK" display becomes red characters when shutting
down because abnormality happened time.
INF - 6
12


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Panasonic PT-AE8000EH at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Panasonic PT-AE8000EH in the language / languages: English as an attachment in your email.

The manual is 38,45 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info