215421
21
Zoom out
Zoom in
Previous page
1/30
Next page
ENGLISH-41
Adjustments and settings
40-ENGLISH
Adjusting the position
Press the F or G button to select
an item, and then press the I or H
button to change the setting.
For items with bar scales, press the
ENTER button or the I or H button
to display the adjustment screen,
and then Press the I or H button
to make the adjustment.
When an S-VIDEO/VIDEO/DVI
signal is being input.
B When a DVI signal is being input,
only “ASPECT” can be adjusted.
When a YPBPR signal is being input
When a PC signal is being input
POSITION
H-POSITION 0
V-POSITION 0
ASPECT 16:9
SELECT ENTER ESC
Horizontal position
(H-POSITION)
(S-VIDEO/VIDEO/YPBPR/PC only)
To move the picture to the left: I button
To move the picture to the right: H button
Vertical position
(V-POSITION)
(S-VIDEO/VIDEO/YP
BPR/PC only)
To move the picture down: I button
To move the picture up: H button
DOT CLOCK
(PC only)
Periodic striped pattern interference
(noise) may occur when a striped
pattern such as the one below is
projected. If this happens, press the
I or H button to adjust so that any
such noise is minimised.
CLOCK PHASE
(PC/YPBPR only)
Adjust the “DOT CLOCK” setting
first before carrying out this
adjustment. Press the I or H
button to adjust so that the noise
level is least noticeable.
POSITION
H-POSITION 0
V-POSITION 0
DOT CLOCK 0
CLOCK PHASE 0
ASPECT 4:3
AUTO SETUP
SELECT ENTER ESC
When the input signal is from a
PC, first select “AUTO SETUP”
and then press the ENTER button
to initiate automatic positioning.
If the optimum setting is not
obtained when “AUTO SETUP” is
carried out, adjust by the following
procedure.
POSITION
H-POSITION 0
V-POSITION 0
CLOCK PHASE 0
ASPECT 4:3
SELECT ENTER ESC
ASPECT
Refer to page 28.
AUTO SETUP
(PC only)
“H-POSITION”, “V-POSITION”,
“DOT CLOCK” and “CLOCK
PHASE” are automatically adjusted
according to the input signal.
Changing the display language
Indicates the language which is
currently set
# Select “LANGUAGE” from the “MAIN MENU” and then press the
ENTER button.
$ Press the F or G button to select a language and then press the
ENTER button.
LANGUAGE ENGLISH
ENGLISH
DEUTSCH
FRANÇAIS
ESPAÑOL
ITALIANO
SELECT ENTER ESC
Turning off the picture momentarily
(SHUTTER)
The “SHUTTER” function can be used to momentarily turn off the picture
when the projector is not being used for short periods of time. The projector
uses less power in “SHUTTER” mode than it does in normal projection
mode.
# Select “SHUTTER” from the “MAIN MENU” and then press the
ENTER button.
$ Press any button on either the projector or remote control unit
(except the LIGHT button) to return to normal operating mode.
B When YPBPR signals are being
input, “CLOCK PHASE” can be
adjusted only when HDTV60/
HDTV50/750p signals are
being input.
NOTE:
B When the “ASPECT” is set to
“V SCROLL” (page 28), “AUTO
SETUP” cannot be performed.
NOTE:
B
If signals with a dot clock
frequency of 100 MHz or higher
are being input, interference
may not be completely
eliminated when the “DOT
CLOCK” and “CLOCK PHASE”
adjustments are carried out.
21


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Panasonic pt ae500 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Panasonic pt ae500 in the language / languages: English as an attachment in your email.

The manual is 1,01 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info