543737
9
Zoom out
Zoom in
Previous page
1/36
Next page
Precautions with regard to safety
E
NGLISH - 9
Important
Information
Cautions on use
In order to get the picture quality
Draw curtains or blinds over windows and turn off any
lights near the screen to prevent outside light or light
from indoor lamps from shining onto the screen.
Depending on where the projector is used, air exhaust
vents or the warm air from air conditioning can cause a
shimmering effect on the screen. For this reason, take
care not to shield the air exhaust vents and consider
the direction of the air owing from air conditioning.
Do not adjust the lens focus in the initial period
z
(within approx. 30 minutes) after switching the
projector on.
Do not touch the surface of the
projector lens with your bare hand.
If the surface of the lens becomes dirty from ngerprints
or anything else, this will be magnied and projected
onto the screen. Cover the lens with the lens cap when
the projector is not used.
The projector has a high pressure
mercury lamp that is characterized
as follows:
The brightness of the lamp will decrease over time.
z
The lamp may explode or shorten the lamp life by
z
shocks or chipping damage.
In rare cases, it may burst shortly after the rst use.
z
The possibility of its bursting increases when the
z
lamp is used beyond the replacement time.
If the lamp bursts, gas inside the lamp is released
z
in the form of smoke.
The life of a mercury lamp varies according to the
z
individual difference or conditions of use.
In particular, turning the power on and off frequently
z
and/or repeatedly as well as continuous use for
12 hours will greatly affect the life cycle. Provide a
lamp for replacement in advance.
Connection to external device
When connecting the projector to a computer or
external device, use the power cord supplied with the
corresponding device and a commercially available
shielded interface cable.
Optical components
It may be necessary to replace the optical components
such as liquid crystal panels and polarizing plates
in less than 1 year if using the projector in a high
temperature environment or in a very dusty, oily smoke
or tobacco smoke environment. For more details,
please contact your dealer.
Liquid crystal panel
Do not project the same image for long periods of
time, as this may remain as an afterimage on the liquid
crystal panel. Display the white screen test pattern
for more than an hour to remove it. See the functional
instructions that is in the provided CD-ROM.
Cleaning and maintenance
Ask an Authorized Service Center
to clean the inside of the projector
at least once a year.
If dust is left to build up inside the projector without
being cleaned out, it can result in re or problems
with operation. It is a good idea to clean the inside of
the projector before the season when humid weather
arrives.
Ask your nearest Authorized Service Center to clean
the projector when required.
Please discuss with the Authorized Service Center
regarding cleaning costs.
Be sure to remove the power plug from the wall
z
outlet before cleaning.
Use soft and dry cloth to clean the cabinet.
z
Use a soft cloth moistened in warm water to clean
away oil. Do not use solvents such as benzene,
thinner, and alcohol, detergents for kitchens, or a
chemical cloth. If using such solvents, the outer case
will become deformed, and the paint may peel off.
Do not clean the lens surface with fuzzy or
z
dusty cloths.
If dust adheres to the lens, it will be magnied and
projected on the screen. Use a soft and clean cloth
to wipe off dust.
Disposal
When discarding this product, please contact your local
authorities or dealer and ask for the correct method of
disposal.
9


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Panasonic PT-AE4000U at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Panasonic PT-AE4000U in the language / languages: English as an attachment in your email.

The manual is 8,15 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Panasonic PT-AE4000U

Panasonic PT-AE4000U Installation Guide - English - 50 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info