522673
52
Zoom out
Zoom in
Previous page
1/112
Next page
Note
Check that the LED is orange. If not, timer programmes are not active or not stored.
Timer Programming reminder messages will remain displayed until one of the following occurs:
You press the OK button to view the programme or the EXIT button to cancel the reminder.
The timer programming event that the reminder is set for ends.
“!” identifies that any timer programming events have overlapped. “Ext Rec.” and “USB HDD Rec.” are given
priority over “Reminder”. When two or more “Ext Rec.” / “USB HDD Rec.” overlap, the first timer programming
event starts and finishes as programmed. The next timer programming event will then start.
2 mins. before the starting time, a reminder message appears if you are watching TV.
To remove the message and start the programme
To cancel the Timer Programming
EXIT
The recording of Timer Programming will automatically change to the programmed channel 10 seconds before
the start time.
To stop recording of the timer programming event, it may be necessary to stop the recorder manually.
The recording of Timer Programming will be performed even if the TV is in Rewind LIVE TV recording (p. 67) and
Pause Live TV recording (p. 91). In this case, these recordings will be cancelled.
EXIT
INPUT
G
U
I
D
E
TV
MENU
52
Timer Programming
Timer Programming from Menu
The Timer Programming menu allows you to choose programmes that you wish to remind watching
or record to the external recorder or the USB HDD. At the correct time, the TV will tune to the correct
channel automatically to record even if the TV is in Standby mode.
TV Guide may also be used to set timer programming event (p. 22).
Timer Programming can store up to 15 events.
For recording using Timer Programming, the TV must be either On or in standby. For reminders to be displayed,
the TV must be On.
No other channel can be selected while the recording of Timer Programming is in progress.
It may not be possible to record an encrypted programme (which is copy-protected).
When recording programmes to the external recorder, be sure to make the proper settings on the recorder
connected to the TV.
If a compatible recorder with Q-Link or similar technologies is connected to the TV (p. 88) and the “Link Settings”
(p. 34) are correct, no setting of the recorder is required. Also read the manual of the recorder.
If the recorder is not compatible with Q-Link or similar technologies, set “Q-Link” in the Setup Menu (p. 34) to the
connected terminal (AV1 or AV2), and set the timer of the recorder in addition to the Timer Programming on the
TV. For preparations of a recorder, read the manual of the recorder.
When recording programmes to the USB HDD, be sure to register the USB HDD and enable it for recording in the
“USB HDD Setup” (p. 64).
Recordings are always in standard definition composite video via SCART, even if the original programme is in
high definition.
1
Select the tuner you want to use
p. 16
TV
2
Display the menu
MENU
3
Select “Setup”
Main Menu
Picture
Sound
Setup
access
select
4
Select “Timer Programming”
Setup Menu
1/2
Child Lock
freesat Tuning Menu
Other Sat. Tuning Menu
Display Settings
Network Setup
Access
Off
USB HDD Setup
Link Settings
Off Timer
Timer Programming
access
select
5
Set
To return to TV
EXIT
To unlock the tuner
(stop recording)
G
U
I
D
E
EXIT
52


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Panasonic Panasonic TX-P50V20 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Panasonic Panasonic TX-P50V20 in the language / languages: English as an attachment in your email.

The manual is 5,92 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Panasonic Panasonic TX-P50V20

Panasonic Panasonic TX-P50V20 Quick start guide - English, Dutch - 28 pages

Panasonic Panasonic TX-P50V20 User Manual - Dutch - 104 pages

Panasonic Panasonic TX-P50V20 User Manual - Danish - 100 pages

Panasonic Panasonic TX-P50V20 User Manual - Polish - 100 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info