578991
36
Zoom out
Zoom in
Previous page
1/72
Next page
Programming
36
Helpline Tel. No.: U.K. 0844 844 3898 Ireland 01289 8333
Answering the baby monitor
When monitoring with a handset:
Press {C } to answer calls.
If you want to respond from the
monitoring handset, press 1.
L The monitoring handset will answer
calls automatically when the auto
intercom feature is set to On
(page 53).
Note:
L If you receive an outside call when
communicating with the monitored
handset, you hear 2 tones. To
answer the call, press {ic}, then
press {C}.
When monitoring from an outside
line:
To answer a call, follow the operation
for your phone.
If you want to respond from the
monitoring handset, press (1 using
tone dialling.
You can turn off the baby monitor
feature by pressing ().
Note:
L 2 minutes after the monitored
handset starts a call,
communication between the
monitored handset and monitoring
phone line is turned off
automatically.
Registering a unit
Operating additional units
Additional handsets
Up to 6 handsets can be registered to a
single base unit.
Important:
L The additional handset model
recommended for use with this unit is
noted on page 4. If another handset
model is used, certain operations may
not be available.
Additional base units
Handsets can be registered to up to 4
base units, allowing you to add
additional base units and extend the
area in which your handset(s) can be
used. If a handset moves out of range of
its base unit when Auto is selected on
base unit (page 37), it looks for another
base unit to make or receive calls. A
base unit and the handsets it
communicates with is called a “radio
cell”.
Note:
L Calls are disconnected when the
handset moves from one radio cell to
another.
Registering a handset to a
base unit
The supplied handset and base unit are
pre-registered. If for some reason the
handset is not registered to the base unit
(for example, _ is displayed even when
the handset is near the base unit), re-
register the handset.
1 Handset:
1 (middle soft key) (13)
2 {r}: Select a base unit number. s
M
L This number is used by the
handset as a reference only.
3 Base unit:
Press and hold {x} for about 5
seconds. (No registration tone)
L If all registered handsets start
ringing, press {x} again to stop,
then repeat this step.
TG862xE(e).book Page 36 Thursday, March 17, 2011 11:40 AM
36


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Panasonic Panasonic KX-TG8623 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Panasonic Panasonic KX-TG8623 in the language / languages: English as an attachment in your email.

The manual is 3,45 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Panasonic Panasonic KX-TG8623

Panasonic Panasonic KX-TG8623 User Manual - German - 76 pages

Panasonic Panasonic KX-TG8623 User Manual - Dutch - 68 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info