559203
29
Zoom out
Zoom in
Previous page
1/44
Next page
Settings
29
SQT0280
Still Mode
Select the type of picture shown when you pause
playback.
Seamless Play
The chapter segments in playlists are played
seamlessly.
Select “On” when the picture freezes for a
moment at the chapters segment in playlists.
*1
A high resolution image/display technology of
approximately 4000 (width) k 2000 (height) pixels.
*2
A progressive image recorded at a rate of 24 frames per
second (motion-picture film). Many BD-Video movie
contents are recorded in 24 frames/second in accordance
with the film materials.
Dynamic Range Compression
You can listen at low volumes but still hear
dialogue clearly.
(Dolby Digital, Dolby Digital Plus and Dolby
TrueHD only)
“Automatic” is effective only when playing Dolby
TrueHD.
Digital Audio Output
Press [OK] to show the following settings:
¾ Dolby D/Dolby D +/Dolby TrueHD
¾ DTS/DTS-HD
¾ MPEG Audio
Select the audio signal to output.
Select “PCM”, when the connected
equipment cannot decode the respective
audio format. This unit decodes the audio
format and transmits to the connected
equipment.
If you do not make proper settings the audio
may be static or noisy.
¾ BD-Video Secondary Audio
Select whether or not to mix the primary and
secondary audio (including the button click
sound).
If “Off” is selected, the unit outputs the primary
audio only.
¾ HDMI Audio Output
This setting selects whether or not to output
audio from HDMI.
Select “Off” when the TV is connected to this
unit via HDMI AV OUT terminal, and this unit
is also connected to other devices, such as
an amplifier/receiver via an DIGITAL AUDIO
OUT terminal.
OPTICAL / COAXIAL Down Sampling
Select whether or not to convert the sampling
frequency of the audio to be output from the
OPTICAL/COAXIAL terminal.
If you choose to convert the sampling frequency,
you can limit the maximum output to 48 kHz or
96 kHz.
Set a frequency supported by the connected
device.
When playing back BD-Video, signals are
converted to 48 kHz despite the settings in the
following cases:
when the signals have a sampling frequency
of 192 kHz
when the disc has copy protection
when “BD-Video Secondary Audio” is set to
“On”
Downmix
Select the downmix system of multi-channel to
2-channel sound.
Select “Surround encoded”, when the
connected equipment supports the virtual
surround function.
The downmix effect is not available when
“Digital Audio Output” is set to “Bitstream”.
The audio will be output in “Stereo” in the
following cases:
AVCHD playback
Playback of secondary audio (including the
button click sound).
HDMI Output Settings of Music Playback
Minimise the audio noise during music playback
by automatically switching the video output to
1080i.
Automatic
Automatically selects the type
of picture shown.
Field
Select if jittering occurs when
“Automatic” is selected.
Frame
Select if small text or fine
patterns cannot be seen
clearly when “Automatic” is
selected.
Sound
DMP-BDT700EB-SQT0280.book 29 ページ 2014年5月13日 火曜日 午後1時3分
29


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Panasonic Panasonic DMP-BDT700 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Panasonic Panasonic DMP-BDT700 in the language / languages: English as an attachment in your email.

The manual is 2,1 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info