627474
55
Zoom out
Zoom in
Previous page
1/61
Next page
109
Miscellaneous/
Care of Unit/Options
108
Cautions for Use
Take care that no water enters the Movie
Camera when using it in the rain and snow or
on the beach.
The Movie Camera and the cassette could
become damaged. (It might not be repairable.)
If seawater has accidentally splashed on the
Movie Camera, moisten a soft cloth with tap
water, wring it well and wipe the camera body
carefully with it. Then thoroughly wipe it with a
soft, dry cloth.
Keep the Movie Camera away from magnetized
equipment (TVs, video games, etc.).
If you use the Movie Camera on or near a TV,
the electromagnetic radiation may cause picture
and sound distortion.
Strong magnetic fields generated by speakers
and large motors may damage the recordings on
the tape and distort the picture.
The electromagnetic radiation from micro-
processors can adversely influence the Movie
Camera and cause picture and sound distortion.
If the Movie Camera is adversely influenced by
magnetized equipment and does not work
correctly, turn the Movie Camera off, remove the
Battery or disconnect the AC Adaptor and attach
the Battery or connect the AC Adaptor again.
Then turn the Movie Camera on.
Do not use the Movie Camera near a radio
transmitter or high-voltage power line.
If you record near a radio transmitter or high-
voltage power line, the recorded picture and
sound may be adversely influenced.
Do not use the Movie Camera for surveillance
and other industrial applications.
If the Movie Camera is being used for a long
time, the inside temperature could rise
excessively and this may cause malfunction.
This Movie Camera is not designed for industrial
use.
Take care that no sand and fine dust enters the
Movie Camera when using it on a beach or
similar places.
Sand and dust could damage the Movie Camera
and cassette. (Be careful when inserting and
removing the cassette.)
Do not spray insecticide or volatile agents on
the Movie Camera.
Such agents could deform the body and cause
the surface coating to peel off.
Do not leave the Movie Camera in direct contact
with rubber or plastic products for a long time.
Do not use benzine or thinner for cleaning.
They could deform the body and cause the
surface coating to peel off.
Before cleaning, remove the Battery or unplug
the AC Mains Lead from the AC mains socket.
Wipe the Movie Camera with a soft, clean cloth.
To remove persistent stains, wipe with a cloth
moistened with mild detergent diluted with water,
and then finish with a dry cloth.
When storing or transporting the Movie Camera,
place it in a softly padded bag or case to prevent
the coating of the camera body from wearing off.
After use, always take out the cassette and
remove the Battery or unplug the AC Mains
Lead from the AC mains socket.
If you leave the cassette in the Movie Camera,
the tape can become loosened and damaged.
If you leave the Battery attached to the Movie
Camera for a long time, the voltage level may
drop very low so that the Battery cannot be used
any more even after charging.
Notes about the AC Adaptor
When the Battery is attached or removed during
charging, the [CHARGE] Lamps may temporarily
fail to show the correct display or they may go off
for a moment because the charge is being
measured: this is normal and not a malfunction.
When the Battery is re-attached while the
[QUICK] Lamp is lighted and the [100%] Lamp is
flashing, the [QUICK] Lamp starts flashing again,
and it may take some moments for the lamp to
stop flashing and light: this is normal and not a
malfunction.
When the Battery is warm, charging takes longer
than usual.
When you use the AC Adaptor near a radio, the
radio reception may be distorted. Keep the AC
Adaptor more than 1 metre away from the radio.
When the AC Adaptor is in use, it may emit a
whirring sound. However, this is normal.
After use, be sure to disconnect the AC Mains
Lead from the AC mains socket. (If you leave it
connected, a small amount of electricity is
consumed.)
Always keep the terminals of the AC Adaptor and
the Battery clean.
When the Charge Lamps on the AC
Adaptor Flash as Warning
When the Charge Lamps Flash Slowly
The temperature of the Battery is low (or high), or
the Battery is excessively discharged, therefore,
charging takes longer than normally.
When the [QUICK] and [100%] Charge Lamps
Flash Alternately, or When No Charge Lamps
Light
Remove and then re-attach the Battery. Or, attach
the Battery to the Movie Camera and perform
playback (or some other operation) for
1020 minutes. Then remove the Battery and
attach it again to the AC Adaptor. If charging is still
impossible, some malfunction has occurred in the
Battery or the AC Adaptor. Please consult with
your dealer.
Using the Movie Camera with a Computer
[S-VIDEO IN/OUT]
[AV IN/OUT]
[IR TRANSMITTER]
1 Interface Box
2 AC Adaptor
[DIGITAL STILL PICTURE]
1
2
MIC
AV IN/OUT
PHONES
D.STILL
PICTURE
S-VIDEO
IN/OUT
EDIT
E
(MINI)
DV
¥
21-pin
Adaptor
If your VCR is not equipped with AV Input
Sockets, the 21-pin Adaptor (purchase
separately) is necessary. Consult your dealer.
To use the DV STUDIO2 software via USB, a
computer with Windows
®
98 preinstalled is
necessary.
Mega-Pixel Pictures cannot be captured. The
picture size is fixed at [640k480].
Pictures that you intend to import from cassette
into computer applications should be recorded in
the SP Mode.
When recording, take care that the Time Code is
uninterrupted from the beginning of the tape.
When importing pictures recorded in the Wide
Mode into the personal computer, the imported
pictures will appear stretched vertically. (p. 93)
For detailed explanations on the operating
environment, connections and operations, refer
to the Personal Computer Connection Kits
operating instructions.
The Personal Computer Connection Kit
VW-DTA9E (optional), or VW-DTA10B (optional)
makes it possible to connect the Movie Camera to
a computer and transmit still video images to it.
The above illustration shows the connections
in case of using the VW-DTA10B. For the
VW-DTA9E, refer to its operating instructions.
Computer System Requirements
(VW-DTA10B)
DV STUDIO2 can be installed in a PC/AT
compatible personal computer which can run
Microsoft
®
Windows
®
95/98.
Compatible machines:
Personal computer with 80486DX4 or higher CPU
(Pentium
TM
or higher recommended)
Graphic card:
True Colour (approx. 16.7 million colours)
recommended (operation also possible even with
256 colours)
Installed memory:
16 MB or more (32 MB or more recommended)
Free hard disk space:
At least 16 MB
Disk drive: CD-ROM drive
Ports: RS-232C (D-sub 9 pin) or USB
Other requirements: Mouse
To connect the Movie Camera to the computer,
use the special Interface Box
1 contained in the
Personal Computer Connection Kit.
55


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Panasonic NVMX300B at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Panasonic NVMX300B in the language / languages: English as an attachment in your email.

The manual is 31,59 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info