627474
14
Zoom out
Zoom in
Previous page
1/61
Next page
Basic Operations
26 27
Title Procedure Remarks, etc.
Returning to Normal Recording
Press the Backlight Button [BLC].
For Recording Check, the Movie Camera must be in
the same mode (SP or LP) as used for recording,
otherwise the playback picture is distorted.
Using the Mini-DV Format Digital Video Head
Cleaner (VFK1451)
1
Insert the Head Cleaner into the Movie Camera in
the same way as a video cassette.
2
Press the Play Button [1], and after
approximately 20 seconds press the Stop Button
[]. (Do not rewind the tape.)
3
Take out the Head Cleaner. Insert a video
cassette, perform recording and then play it back
to check the picture.
4
If the picture is still not clear, repeat above
operation steps
1
3
. (Do not use the Head
Cleaner more than 3 times in succession.)
This Video Head Cleaner (VFK1451) is available
from Panasonic service centres.
Notes:
Do not rewind the tape in the Head Cleaner after
every use. Rewind it only after the tape has
reached its end, and then use it again in the same
way from the beginning.
If the video heads again become clogged with dirt
soon after cleaning, this might be caused by a
damaged tape. In this case, stop using that
cassette immediately.
Be careful not to clean the video heads too much.
(Too much cleaning could cause excessive wear to
the video heads. If the video heads get worn, the
picture is not played back clearly even after
cleaning.)
If using the Head Cleaner does not clear the video
head clogging, the Movie Camera requires
cleaning or repairing by a service centre.
Please consult with your dealer.
Video head cleaning due to clogging is not a
malfunction of the product and is not covered by
your warranty.
Checking If the Picture Is
Recorded
(Recording Check)
To play back the final few seconds of the last recorded
scene in the Recording Pause Mode.
Recording Backlit Scenes
(Backlight Compensation)
To prevent the backlit subject from being recorded very
dark.
(Backlight means that the light falls on the subject from
behind, i.e. the subject is between the light source and
the Movie Camera.)
1
Press the Recording Check Button [S] briefly in
the Recording Pause Mode.
The [CHK] Indication appears.
After checking, the Movie Camera returns to the
Recording Pause Mode.
1
Press the Backlight Button [BLC].
After the [ª] Indication flashes, it will be displayed.
1
;
ª
5
6
j
SEARCH
S
SEARCH
i
FADE
BLC
STILL
CHK
6
j
SEARCH
S
1
BLC
Video Head Clogging and Remedy
When the video heads (which contact the tape) are
dirty, the playback picture contains mosaic-like
patterns or the whole screen becomes black. If they
become even more dirty, the recording performance
deteriorates and in the worst case, recording may
not be possible at all.
Causes of Dirty Video Heads
A lot of dust in the air
High-temperature and high-humidity environment
Damaged tape
Long-time use
When the Backlight Button [BLC] is pressed, the
screen will get bright all over.
When the [OFF/ON/MODE] Switch is operated, the
Backlight Compensation will be cancelled.
ª
1
BLC
14


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Panasonic NVMX300B at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Panasonic NVMX300B in the language / languages: English as an attachment in your email.

The manual is 31,59 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info