627470
13
Zoom out
Zoom in
Previous page
1/54
Next page
Basic Operations
24 25
Title Procedure Remarks, etc.
3
To pause recording:
Press the Recording
Start/Stop Button
again.
The [PAUSE] Indication
appears.
4
To finish recording:
Set the [OFF/ON/MODE]
Switch to [OFF].
If you leave the Movie Camera in the Recording
Pause Mode for more than 6 minutes, it
automatically switches off to protect the tape and
to conserve battery power. To resume recording
from this condition, set the [OFF/ON/MODE]
Switch to [OFF] and then to [ON] again.
Recording onto the cassette is not possible if the
[TAPE/CARD] Selector is at [CARD]. (NV-MX5,
NV-MX7 only)
Be sure to remove the Lens Cap before setting the
[OFF/ON/MODE] Switch to [ON]. If the Lens Cap is
attached to the Lens when you set the
[OFF/ON/MODE] Switch to [ON], the automatic white
balance adjustment (p. 119) may not be precise.
Recording Indicating (Tally) Lamp
The Recording Indicating (Tally) Lamp lights during
recording to let the people in front of the Movie Camera
know that recording is being performed.
If you set [REC LAMP] on the [OTHER FUNCTIONS]
Sub-Menu to [OFF], the Recording Indicating (Tally)
Lamp does not light.
Even if [REC LAMP] on the [OTHER FUNCTIONS]
Sub-Menu is set to [OFF], the Recording Indicating
(Tally) Lamp flashes briefly to confirm when the
Movie Camera has received a command from the
Remote Controller.
Recording
Indicating (Tally)
Lamp
PAUSE
PAUSE
MODE
ON
OFF
Recording (Filming)
After setting the [OFF/ON/MODE] Switch to [ON] to
turn the Movie Camera on and setting the Mode
Selector Switch to [AUTO], you can start recording
simply by pressing the Recording Start/Stop Button. In
this case, the Movie Camera adjusts the focus and
white balance fully automatically.
1
Set the [OFF/ON/MODE]
Switch to [ON].
The [CAMERA] Lamp
lights.
2
Press the Recording
Start/Stop Button.
Recording starts.
The [RECORD] Indication
appears briefly and then
changes to [REC].
MNL
AUTO
CAMERA
CARD P.B
VCR
MODE
ON
OFF
PAUSE
CAMERA
CARD P.B
VCR
MODE
ON
OFF
RECORD
REC
Before Recording
Check the following settings before recording
especially important scenes:
Recording Speed (p. 13, 18, 78)
When you intend to perform editing or audio dubbing
afterward: Set to [SP].
Audio Recording Mode (p. 18, 78)
When you want to perform audio dubbing afterward:
Set to [12bit].
Cinema Mode (p. 18, 36)
Depending on the light source and recording
situation, correct automatic focusing and white
balance adjustment may not be possible. In such
cases, adjust them manually.
Focus: p. 30
White Balance: p. 62
Mode Selector Switch
13


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Panasonic NVMX1B at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Panasonic NVMX1B in the language / languages: English as an attachment in your email.

The manual is 7,71 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info