627465
26
Zoom out
Zoom in
Previous page
1/52
Next page
VCR Mode
-26-
1
Set [VCR FUNCTIONS] >> [AV IN/OUT SETUP] >>
[AV JACK] >> [IN/OUT].
2
Continuing the aforesaid setup, select [A.DUB INPUT]
>> [MIC] or [AV IN].
Set to [AV IN] when external device is used, and to [MIC]
when an external or built-in microphone is used.
Switch the Movie Camera over to the Still Playback
Mode where you want to add new sound.
3
Press the [A.DUB] Button
(60)
on the Remote
Controller.
4
To start Audio Dubbing, press the [;] Button
(74)
on
the Remote Controller.
To Cancel Audio Dubbing
Press the [;] Button
(74)
on the Remote Controller.
The Movie Camera is in the Still Playback Mode again.
To Play Back the Sound Recorded by 12bit Audio
Dubbing
Set [VCR FUNCTIONS] >> [PLAYBACK FUNCTIONS] >>
[12bit AUDIO] >> [ST2] or [MIX].
ST1: It plays back only the original sound.
ST2: It plays back only the sound added by Audio Dubbing.
MIX: It plays back both the original sound and the sound
added by Audio Dubbing simultaneously.
For other notes concerning this item, see
-40-
.
Copying on an S-VHS (or a VHS) Cassette
(Dubbing)
After connecting the Movie Camera and the VCR as
illustrated, start the following procedures.
1 AV Cable
2 S-Video Cable (not supplied)
PUSH
W.B/SHUTTER/IRIS/
MF/VOL/JOG
M
E
N
U
(21)
(19)
INDEX INDEX
SELECT
STOP
KL
V
/REW
STILL ADV
T
W
sVOL r
¥REC
MULTI/
P-IN-P
A.DUB
PLAY
PAUSE
FF/
W
STILL ADV
61 5
;
ED
(60)
(74)
21-pin Adaptor
12
[VIDEO IN]
[AUDIO IN]
[S-VIDEO IN]
S-VIDEO
IN/OUT
AV IN/OUT
PHONES/
REMOTE
If your TV is not equipped with AV Input Sockets, the 21-pin
Adaptor (purchase separately) is necessary. Consult your
dealer.
Be sure to press the [OSD] Button (
-6-
) on the Remote
Controller prior to copying so that no indications are visible.
Otherwise, the displayed tape counter and function
indications are also copied.
Movie Camera:
1
Insert the recorded Cassette.
VCR:
2
Insert an unrecorded Cassette with an erasure
prevention tab.
If various setups (such as external input, tape speed,
etc.) are required, please refer to the operating
instructions of your VCR.
Movie Camera:
3
Press the [1] Button to start playback.
VCR:
4
Start recording.
5
Press the Pause or Stop Button to stop recording.
Movie Camera:
6
Press the [] Button to stop playback.
Recording the Contents of Other Equipment
After connecting the Movie Camera and the other
equipment as illustrated, start the following procedures.
1 AV Cable
2 S-Video Cable (not supplied)
If your TV is not equipped with AV Input Sockets, the 21-pin
Adaptor (purchase separately) is necessary. Consult your
dealer.
Movie Camera:
1
Set [VCR FUNCTIONS] >> [AV IN/OUT SETUP] >>
[AV JACK] >> [IN/OUT].
2
Insert an unrecorded Cassette.
Other Equipment:
3
Insert a recorded Cassette and start playback.
21-pin Adaptor
12
[VIDEO OUT]
[AUDIO OUT]
[S-VIDEO OUT]
S-VIDEO
IN/OUT
AV IN/OUT
PHONES/
REMOTE
PUSH
W.B/SHUTTER/IRIS/
MF/VOL/JOG
M
E
N
U
(21)
(19)
26


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Panasonic NVGX7B at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Panasonic NVGX7B in the language / languages: English as an attachment in your email.

The manual is 5,34 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info