627465
14
Zoom out
Zoom in
Previous page
1/52
Next page
Camera Mode
-14-
Camera Mode
Recording
When recording with the [AUTO/MNL/FOCUS] Switch
(50)
set to [AUTO], the Movie Camera automatically adjust the
focus and white balance. In some cases, they cannot be
adjusted automatically and need to be adjusted manually.
(
-18-
,
-19-
)
1
Set the [OFF/ON/MODE] Switch
(28)
to [ON].
The [CAMERA] Lamp
(27)
lights up.
2
Set the [TAPE/CARD/CARD MODE] Selector
(4)
to
[TAPE].
3
Press the Recording Start/Stop Button
(26)
.
Recording starts.
After the [RECORD] is displayed, it changes to [REC].
ª
Recording Lamp (Tally Lamp)
The Recording Lamp
(38)
lights up during recording and
alerts those being recorded that recording is in progress.
The Recording Lamp does not light up if the [REC LAMP]
on the [OTHER FUNCTIONS] Sub-Menu is set to [OFF].
ª
To Pause the Recording
Press the Recording Start/Stop Button
(26)
again.
The [PAUSE] Indication is displayed.
If the Recording Pause Mode continues for more than
6 minutes, the power is turned off automatically for tape
protection and power conservation. To resume recording
from this condition, turn off, then turn on the power again.
AUTO MNL FOCUS
(50)
O
F
F
O
N
M
O
D
E
CAMERA
VCR
CARD
P. B
(28)
(27)
TAPE
CARD
CARD MODE
(4)
RECORD
REC
(26)
(38)
PAUSE
PAUSE
ª
To Check the Recording
By pressing the [S] Button
(9)
briefly in the Recording
Pause Mode, you can play back the last few seconds of the
recorded scene.
The [CHK] Indication is displayed. After checking, the
Movie Camera resumes the Recording Pause Mode.
ª
To View the Recorded Scene while the
Recording Is Paused (Camera Search)
The recorded scene can be viewed by keep pressing the
[SEARCHj] Button
(9)
or [SEARCHi] Button
(12)
in the
Recording Pause Mode.
When the [SEARCHj] Button is pressed, images are
played back in the reverse direction.
When the [SEARCHi] Button is pressed, images are
played back in the forward direction.
ª
Recording Yourself
By opening the LCD Monitor and rotating it frontward (to the
lens side), you can let the subject in front of the Movie
Camera monitor the shot while recording is in progress.
When the LCD Monitor is opened, the Viewfinder is
disabled automatically. However, when the LCD Monitor is
rotated frontward, the image is also shown in the
Viewfinder.
If you prefer to have the image on the LCD Monitor to look
like an image in a mirror, set [SELFSHOOT] on the
[OTHER FUNCTIONS] Sub-Menu to [MIRROR]. Images
are recorded normally and no left and right reversal occurs.
If [MIRROR] is used during self-recording, only the basic
indications, such as the Recording Indication [ ] (Red) or
[¥], Recording Pause Indication [ ] (Cyan) or [¥;] and
Remaining Battery Power Indication [x], are displayed.
If a general Warning/Alarm Indication [°] appears, return
the LCD Monitor to the original position in order to check
the specific content of the Warning/Alarm Indication.
ª
To Finish the Recording
Set the [OFF/ON/MODE] Switch
(28)
to [OFF].
For other notes concerning this item, see
-38-
.
Quick Start
By pressing the [QUICK START] Button
(25)
, and the Movie
Camera will be ready for recording in approximately
1.5 seconds after the Movie Camera is turned on.
1
Press the [QUICK START] Button
(25)
.
The Quick Start Recording Lamp
(24)
lights up.
SEARCH
(9)
SEARCH
SEARCH
(9)
(12)
START
QUICK
O
F
F
O
N
M
O
D
E
(24)
(25)
14


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Panasonic NVGX7B at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Panasonic NVGX7B in the language / languages: English as an attachment in your email.

The manual is 5,34 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info