627449
52
Zoom out
Zoom in
Previous page
1/76
Next page
Others
-52-
N (F, E): Card Photoshot Picture Quality
(during Card Photoshot
recording)
[F] means Fine, [N] means
Normal and [E] means Economy.
-39-
, , : MPEG4 Picture Quality -41-
ACCESS: While Card is being read (during
Playback, Formatting and
Multi-Picture Function use).
-38-
0: Remaining Number of Card
Photoshot pictures
-39-
R:0h00m: Remaining time of MPEG4 or
Voice data
H, L: Card Continuous Photoshot
Recording
-39-
: Lock Setting -47-
¥ (White): DPOF Setting completed (set to
1 or more picture)
-46-
¥ (Green): Slide Show Settings completed
-44-
¥ (Blue): DPOF Setting (set to 1 or more
picture)/Slide Show Settings both
completed
-44-, -46-
: [640k480] Image size
For images not recorded with this Movie
Camera, the size display is determined as
follows according to the number of horizontal
pixels.
: 640 or more, less than 800 (The
size is not displayed at under
640 pixels.)
: 800 or more, less than 1024
: 1024 or more, less than 1280
: 1280 or more, less than 1600
: 1600 or more, less than 2048
: 2048 or more
(Cyan): Card Photoshot Mode
(Red): While Card Photoshot recording
is activated
(Red): No Card (Still Picture Mode)
(Cyan): Moving Picture (MPEG4)
Recording
(Red): While Moving Picture (MPEG4)
recording is activated
(Red): No Card (MPEG4 Mode)
(Cyan): Voice Recording Mode
(Red): While Voice Recording is
activated
(Red): No Card (Voice Recording Mode)
ª To Change the Counter Display Mode
By changing [C.DISPLAY] on the
[DISPLAY SETUP] Sub-Menu, you can change
the Counter Display Mode to Tape Counter
Indication [COUNTER] (0:00.00), Memory
Counter Indication [MEMORY] (M0:00.00), and
Time Code Indication [TIMECODE]
N F SF
640
640
SVGA
XGA
SXGA
UXGA
QXGA
PICTURE
PICTURE
PICTURE
MPEG
4
MPEG
4
MPEG
4
VOICE
VOICE
VOICE
(0h00m00s00f). (-15-) By repeatedly pressing the
[COUNTER] Button on the Remote Controller,
you can change the Counter Display Mode.
ª To Display Date/Time Indication
To display Date/Time Indication, set the
appropriate Date/Time in [DATE/TIME] on the
[DISPLAY SETUP] Sub-Menu. (
-15-)
You can also press the [DATE/TIME] Button of
the Remote Controller repeatedly to display or
change the Date/Time Indication.
ª To Change the Display Mode
By changing [DISPLAY] on the
[DISPLAY SETUP] Sub-Menu, you can change
the Display Mode to All Function Display [ALL],
Partial Display [PARTIAL] and Minimum Display
[OFF]. (
-15-)
Owner ID
You can register your name and address in your
Movie Camera to identify the owner.
1 Set [CAMERA FUNCTIONS] >>
[OTHER FUNCTIONS1] >> [OWNER ID SET]
>> [YES].
The [OWNER ID] Menu appears.
2 Turn the [PUSH] Dial (38) to select
[PIN NUMBER] and press the [PUSH] Dial
(38) to input desired numbers.
3 Turn the [PUSH] Dial (38) to select numbers
and press the [PUSH] Dial
(38) to enter
them.
Be sure to input 4 digits. Otherwise the Pin
Number will not be registered.
4 Press the [] Button.
5 Repeat Steps 2–4 to input desired
characters for [NAME] and [POSTCODE].
You can input up to 12 characters in [NAME],
and up to 11 characters in [POSTCODE].
6 Press the [] Button to finish the setup.
To Verify Owner ID
Keep pressing the [;] Button for approximately
5 seconds.
To Correct the Contents
If Owner ID has already been set, carrying out
Step 1 will display [INPUT PIN NUMBER] on the
screen. Input the Pin Number you have already
selected. If the number is not correct, the screen
will not change. If the number is correct, the
contents of the setup will be displayed. (By
repeating Steps 2 to 4, you can change the
contents.)
ENGText.fm 52 ページ 2003年2月12日 水曜日 午後10時4分
52


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Panasonic NVGS50B at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Panasonic NVGS50B in the language / languages: English as an attachment in your email.

The manual is 6,31 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info