627449
19
Zoom out
Zoom in
Previous page
1/76
Next page
Camera Mode
-19-
ª To View the Recorded Scene while the
Recording Is Paused (Camera Search)
The recorded scene can be viewed by keep
pressing the [SEARCHj] Button
(7) or
[SEARCHi] Button
(9) in the Recording Pause
Mode.
When the [SEARCHj] Button is pressed,
images are played back in the reverse direction.
When the [SEARCHi] Button is pressed,
images are played back in the forward direction.
ª To Finish the Recording
Set the [OFF/ON/MODE] Switch (43) to [OFF].
For other notes concerning this item, see
-54-.
ª To Add a Sound while Recording
With the supplied Free Style Remote Controller
with Mic connected to the [REMOTE] Socket
(24),
you can add a narration while recording is in
progress.
While the [TALK] Button
(84) is pressed, the [ ]
Indication is displayed and the sound is recorded
from [MIC]
(80).
While the [TALK] Button is pressed, the built-in
microphone does not operate.
ª Recording Yourself
By opening the LCD Monitor and rotating it
frontward (to the lens side), you can let the
subject in front of the Movie Camera monitor the
shot while recording is in progress.
When the LCD Monitor is opened, the
Viewfinder is disabled automatically. However,
when the LCD Monitor is rotated frontward, the
image is also shown in the Viewfinder.
SEARCH SEARCH
BACK
LIGHT
(7) (9)
REC
(80)
(84)
If you prefer to have the image on the LCD
Monitor to look like an image in a mirror, set
[SELF REC] on the [OTHER FUNCTIONS1]
Sub-Menu to [MIRROR]. Images are recorded
normally and no left and right reversal occurs.
If [MIRROR] is used during self-recording, only
the basic indications, such as the Recording
Indication [ ] (Red) or [¥], Recording Pause
Indication [ ] (Cyan) or [¥;] and Remaining
Battery Power Indication [x], are displayed.
If a general Warning/Alarm Indication [°]
appears, return the LCD Monitor to the original
position in order to check the specific content of
the Warning/Alarm Indication.
Quick Start
By pressing the [QUICK START] Button (41), and
the Movie Camera will be ready for recording in
approximately 1.3 seconds after the Movie
Camera is turned on.
1 Press the [QUICK START] Button (41).
The Quick Start Recording Lamp
(42) lights
up.
2 Set the [OFF/ON/MODE] Switch (43) to
[OFF].
The Quick Start Recording Lamp remains lit.
3 Set the [OFF/ON/MODE] Switch (43) to [ON].
The Movie Camera will be ready for recording
in approximately 1.3 seconds.
For other notes concerning this item, see
-54-.
START
QUICK
(41)
(42)
O
F
F
O
N
M
O
D
E
(43)
50B-ENG.book 19 ページ 2003年1月17日 金曜日 午後5時29分
19


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Panasonic NVGS50B at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Panasonic NVGS50B in the language / languages: English as an attachment in your email.

The manual is 6,31 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info