627446
32
Zoom out
Zoom in
Previous page
1/76
Next page
VCR Mode
-32-
Finding the End of Recording
(Blank Search Function)
The Blank Search Function aids you locate the
end of the recording on the Cassette quickly.
1 Set [VCR FUNCTIONS] >>
[PLAYBACK FUNCTIONS] >>
[BLANK SEARCH] >> [YES].
The [BLANK] Indication appears during the
Blank Search.
Approximately 1 second before the last
recorded scene, the Movie Camera switches
to the Still Playback Mode.
If there is no blank portion left on the
Cassette, the Movie Camera stops at the end
of the tape.
To Cancel Blank Search Before Completion
Press the [] Button.
Index Search Functions
To facilitate searching of desired scene, this
Movie Camera automatically records index
signals during recording, as explained in the
following.
Photoshot Index Signal
These signals are automatically recorded
whenever still pictures are taken in Photoshot
Mode. (
-20-) Photoshot Index Signals are not
recorded on still pictures recorded in Continuous
Photoshot Mode.
Scene Index Signal
Scene Index Signals are automatically recorded
when you start recording after inserting a
Cassette.
If [SCENE INDEX] of [RECORDING SETUP]
Sub-Menu on the [CAMERA FUNCTIONS]
Main-Menu is set to [2HOUR], an index signal is
recorded when recording is restarted after an
elapse of 2 hours or longer. If it is set to [DAY],
an index signal is recorded when recording is
restarted after the date has changed since the
last recording. (While the index signal is
recorded, the [INDEX] Indication flashes for a
few seconds.)
M
E
N
U
PUSH
MF/VOL/JOG
WB/SHUTTER/IRIS/
(46) (38)
INDEX
If the Movie Camera is switched from the VCR
Mode to Camera Mode or if the date and time is
set before the start of recording, the index
signal is not recorded.
ª Photoshot Index Search
1 Set [VCR FUNCTIONS] >>
[PLAYBACK FUNCTIONS] >> [SEARCH] >>
[PHOTO].
2 Press the [9] Button or [:] Button (61)
on the Remote Controller.
With each press of the corresponding button,
still pictures recorded in Photoshot Mode are
searched.
Sounds are played back for approximately
4 seconds.
ª Scene Index Search
1
Set [VCR FUNCTIONS] >>
[PLAYBACK FUNCTIONS] >> [SEARCH] >>
[SCENE].
2 Press the [9] Button or [:] Button (61)
on the Remote Controller.
When the corresponding button is pressed
once, the [S 1] Indication appears, and
searching of the subsequent scene marked with
an index signal starts. Each time the button is
pressed after the start of Scene Index Search,
the indication changes from [S 2] to [S 9], and
the beginning of the scene corresponding to the
selected number will be searched.
Up to 9 scene numbers can be selected.
M
E
N
U
PUSH
MF/VOL/JOG
WB/SHUTTER/IRIS/
(46) (38)
INDEX INDEX
SELECT
STOP
KL
V
/REW
STILL ADV
W
s
V
PLAY
PAUSE
FF/
W
STILL ADV
61 5
;
ED
(61) (61)
S 1
50B-ENG.book 32 ページ 2003年1月17日 金曜日 午後5時29分
32


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Panasonic NVGS40B at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Panasonic NVGS40B in the language / languages: English as an attachment in your email.

The manual is 6,31 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info