627416
40
Zoom out
Zoom in
Previous page
1/64
Next page
Edit mode
40
VQT0N73
For more information, refer to the operating
instructions for your TV set and recorder.
When you do not need functional indications or
date and time indications, press the [OSD]
button on the remote control for no indication.
(When you connect the movie camera and a
recorder with the DV cable, these indications
may not appear.)
ª
When neither image nor sound from
the movie camera is output to the TV
set
Check that the plugs are inserted as far as they
go.
Check the connected terminal.
When no image is presented on the TV even if
set [BASIC] >> [AV JACK] >> [OUT/Ë], set to
[OUT]. (
-47-)
Recording the contents of other
equipment
You can dub the contents of other equipment to a
DV cassette or card, and can record TV
programs.
Set to Tape Playback Mode.
1 Connect the movie camera and other
equipment.
Connect the movie camera and other
equipment by using the AV cable 1.
If the recorder has an S-Video terminal, then
also connect an S-Video cable 2 (optional). It
allows you to record clearer image.
2 Set [BASIC] >> [AV JACK] >> [IN/OUT].
(Movie camera)
3 Set [ADVANCE] >> [REC STDBY] >> [YES].
(Movie camera)(Only when the Tape
Recording Mode)
The icon appears.
4 Turn the power on and start playback.
(Other equipment)
5 Start recording. (Movie camera)
Recording on a tape:
Move the joystick up to start recording.
Or, while pressing the [
¥REC] button on the
remote controller, press the [
1] button.
Recording on a card:
Press the [PHOTO SHOT] button.
6 Move the joystick of the movie camera
down or press the [] button on the remote
controller to stop recording.
While analog input pictures are being
recorded on a tape or when the movie
camera is in recording standby mode, the
photoshot recording is disabled.
7 Stop playback. (Other equipment)
Do not plug or unplug the cable during recording
or the recording may not be completed properly.
Carefully read the operating instructions for your
TV set and video equipment.
By operating as [SETUP] or [ADVANCE] >>
[AUDIO REC], set the recording sound mode
([12bit] or [16bit]).
If a picture (bilingual video, etc.) containing main
sound and sub sound has been dubbed, select
the desired sound by [SETUP] >> [AUDIO OUT]
on playback.
If a picture containing a copyright protection
signal (copy guard) is recorded, the message
“COPY PROTECTED” appears when recording
it on a tape and the picture is distorted by
mosaic-like patterns at playback.
When wide images are input, the display such
as the menu screen or the operation icon is
expanded horizontally.
If, during recording, an operation such as cue
playback or slow motion playback is performed
on external equipment, mosaic-like patterns
may appear on the picture at playback.
If pictures are recorded when TV broadcasting
signals are weak or pictures are affected by
noise, they may be distorted or may not even be
played back.
If both the S-Video cable and the AV cable are
connected, S -Video signal are input
preferentially.
12
[VIDEO OUT]
[AUDIO OUT]
[S-VIDEO OUT]
AV/
S-VIDEO
STOP
V
/REW
STILL ADV
VOL
¥REC A.DUB
PLAY
PAUSE
FF/
W
STILL ADV
T
W
GS250GN.book 40 ページ 2005年1月26日 水曜日 午後12時17分
40


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Panasonic NVGS250GN at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Panasonic NVGS250GN in the language / languages: English as an attachment in your email.

The manual is 4,09 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info